• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

finally





this is my target. buddys ta cammed heads all that joy. from a 30 roll i can but an instant car on him...then he reels me and and keeps a solid 2 car lead. he has been notified he gets the first "suprise butt sex"

IMAG0190-1.jpg

IMAG0191-1.jpg
 


here she be :)

IMAG0203-1.jpg


and heres the solenoid setup.
IMAG0204-1.jpg


gonna change this up seeing as the diag braces on the 04 are a little different and not flat. bought a strut tower bar and am gonna mount them to that. kits not jetted to a 60 shot. i have jets for 60, 90, 110, and 150. the last two will never be used haha
 
Last edited:


well the console came with the kit. wont fit in my car. the buttons are going inside my center console. im assuming thats a bottle warmer, activatetion and the buttons a purge
 
little update. started mocking the kit up. found out that pre 04 diag braces fit. which i good cuz i dont have to re mount the solenoids. just need to get a pre 04 passenger side brace to match now. lookin like it'll go in sunday if i can mod my vac tree by then to hold my nozzle. eventually going to tap into the back of the blower for the nozzle but not for a while. heres a few pics
IMAG0210-2.jpg


IMAG0211-2.jpg
 
You must log in or register to reply here.
Back
Top