• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Factory XM module to OEM reciever wiring diagram harness

Mike Kerr

New member
I have a 2006 GP GT that does not have XM radio, nor is it wired for it. I purchased a receiver and a XM module from a 2004 GP GT, and also cut the connectors off the ends of the OEM end unit and XM module, in hopes of building a harness. I have searched high and low and can't find a GM made or aftermarket harness to connect the XM module to the OEM head unit. I do know that once I get this working I will need to send the XM module to a service place to wipe out the VIN programmed in the XM module, that Tech II will not wipe out the XM module VIN.

I have started the wire identification process and am in hopes that someone can help identify what these wires do. I have also purchased a SIRGM1 satellite t-harness that I will use to provide the pigtail splice into the OEM head unit and DC power to the XM module.

Any help with the identifying what wires do what and any other tips would be greatly appreciated!

DELPHI XM SATELLITE RADIO PART # 22692861
1 OPEN
2 BROWN WITH WHITE STRIPE
3 GREEN WITH WHITE STRIPE
4 OPEN
5 OPEN
6 OPEN
7 OPEN
8 BLACK WITH WHITE TRIPE
9 BLACK WITH WHITE STRIPE
10 STRANDED
11 OPEN
12 OPEN
13 OPEN
14 OPEN
15 BLUE
16 ORANGE



DELPHI AM/FM/CD/XM RECIEVER PART # 21004246

1 GREEN WITH BLACK STRIPE
2 YELLOW
3 OPEN
4 OPEN
5 OPEN
6 ORANGE
7 CREAM


8 BLACK WITH WHITE STRIPE
9 OPEN
10 OPEN
11 BLUE
12 BROWN


SIRGM1 PIGTAIL CONNECTOR (WITH POWER OPTION)
1 BROWN
2 GRAY
3 WHITE WITH BLACK STRIPE
4 PINK
5 PURPLE
6 RED
7 GREEN WITH BLACK STRIPE
8 WHITE
9 BLACK
10 DARK PINK
11 ORANGE WITH BLACK STRIPE
12 RED WITH BLACK STRIPE

SIRGM1 Power option:
Yellow- with 1 amp fuse
Black
 


This is what I think may be the XM module (DELPHI part number 10309315) wiring description:

1 Not Used
2 Brn/WHT circuit 367, remote playback device left audio signal
3 DK green/ white circuit 368 remote playback device right audio signal
4 not used
5 not used
6 not used
7 LT green circuit 2271 ADG Class 2 serial data (no cable actually present in OEM harness)
8 not used
9 BLK/ White circuit 1851 ground
10 BLK/ White circuit 372 remote playback device common audio signal
11 not used per diagram ( yet has a unshielded stranded cable)
12 not used
13 not used
14 not used
15 not used per diagram (yet has a navy blue wire) (possibly ADG Class 2 serial cable?)
16 Orange circuit 340 Battery positive voltage (assuming it is 12v not 5 volts)
 
Back
Top