Extreme 911! (snapped fitting off the tranny)

[Wakeboy1337]

I leave for FL in 2 weeks and I had a leak so I was going to take off the tranny cooler line and see why the line was leaking. As soon as I started unscrewing it the fitting that goes into the transmision's casing SNAPPED right off. I have this stupid hurricane coming in a few hours and it's supposedly gonna snow right after it and I dont even know where to begin on how to get this damn thing out.

The tranny is a 1998 verison with the screw in fittings. Taking the trans out is also not an option since I already put in my two weeks in at work and I can't be spending loads of money.

 

[jteske88]

i would try and cut a slit across and use by big flat head bit.

 

[Logan541]

i would try and cut a slit across and use by big flat head bit.

what he said

 

[Scottydoggs]

 

[Nighthwk12]

Use an easy out. You can pick up the fittings at an advance or such.

 

[Logan541]

Use an easy out. You can pick up the fittings at an advance or such.

never used one of them before do they really work?

 

[Sushamouf]

Yes they really work. Very well actually.

Sent from my Droid

 

[Logan541]

Thanks

 

[joe0813]

you were trying to take the line off and it snapped?? either you turned the wrong way and it snapped (ive done it :/) oooor it was stripped in there. I would try what the others said with the easy out

 

[Anthony Smith]

easy out and a little heat = done in 30 seconds...