Exhaust Question

[jayroca]

So this my situation... Went the exhaust shop yesterday to weld my exhaust to the headers and to my knowledge they said that they could do it ... Why... They dont have a pipe bender and my spedd daddy headers dont have the remaining piping to bolt to the flex... Im am missing this:

where can i purchase this from? The seller wont just sell me that so is there somewhere i can buy or something close? Its 3 inch i believe thanks!!

 

[91parkave]

Order a mandrel bend or find a competent exhaust shop

 

[ItHurtz]

I cut that and the flex off and had a 3" 45° welded in place, but incompetent shop might not know how to do that.......
40df92d542f7e99fa3c99468a7a59383 by Corey S, on Flickr

 

[REDCRAPGP]

I might still have that piece I'll check when I get back home


Sent from my iPhone using Tapatalk

 

[Scottydoggs]

i just bought these parts for my headers,

this V band clamp set up. http://www.ebay.com/itm/131348293507?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT

and this flex pipe. http://www.ebay.com/itm/250872537110?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT

im welding the V band to the header and the flex, then the flex to the down pipe.

you can also find 3 inch mandrel bent pipe on ebay. all sorts of angles they come in. for about 20 bucks.

 

[jayroca]

Just ordered one thanks guys!!!

 

[Scottydoggs]

im amazed just how thick the flex is. the sd one i can squeeze this one not a chance, the double wall is like 1/2 thick too.