• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

coolant elbows



Ron.. if you aim to do the LIM gaskets. Ensure you get the metal replacements, not plastic. The way to know with fel pro gaskets is the metal has a T on the end of the part number.

Also.. keep the pushrods in order, they are different lengths.
 
Thanks for the fel pro tip . I know about the pushrod situation . I have done quite a few over the years . I was a mechanic for 32 years . I have seen the damage mixing them up causes by diy ers who thought they could do it themselves . Thanks again . RON
 
You must log in or register to reply here.
Back
Top