• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Compass Module Wiring

P

Poseidon215

New member
Hey everyone,

So I did a 3 to 5 button DIC swap probably 2 years ago and I have just been dragging my feet hooking up the compass module. I finally pulled everything apart and the wire is not there. Apparently I have some weird 05 GP Base that doesn't have the wire since everyone else says it's right there takes 2 minutes and your done. I have followed the wire down the driver side by the seat belt and it isn't there. Has anyone had this problem and is there a way to solve it? Here is a picture of the wiring.

b4d363549ee4fef5c278c4df0540d770.jpg


439505975f56034dfb3ec8cda849cded.jpg



Sent from my iPhone using Tapatalk
 


I would go to the junkyard and pull the whole wiring harness from the decklid to the 5 button DIC.

This should give you a rough idea of what you need.
11NavCompass.gif
 
There's nothing in my 05 GTP either, so some cars are not wired for it even though everything else works when i
changed from a 3 button to 5 button.
 
06 base didn't have it either

Has the temp wiring and I just had to add a sensor
 
Last edited:


I have an 06 base and I just did the 3 to 5 button swap. I bought the compass module and everything. I dont have the wiring at the deck lid, has anyone found a solution or did i buy the compass module for nothing?
 
The wire harness your looking for is located in the middle just right of the body control module not the right side near seat belt
 
You must log in or register to reply here.
Back
Top