Wrongwayislost77
New member
Hey, all, I'm Kyle and I have a 112k mile '00 Bronzemist GT with a few minor things done to it. Unfortunately, a drunk hit my passenger side a while back and I have had poor luck finding replacement doors...
The mod list is as follows:
-GMPP Handling Kit
-ZZP Front and Rear Strut Tower and Cross Braces.
-KYB AGX's
-GXP 18's (For Sale right now, PM me for details.)
-12" Slotted Brakes with Braided SS Lines
-WizAired CAI
-ZZP HVTB Stage 1
-HV3
-ZZP Ceramic Coated PowerLog
-ZZP 1.0
-Alternator and Voltage Boosters
-Spyder Projectors
Well, I recently went through a breakup and all the extra dough I'm not spending on her was piling up so I decided to feed the Mod-Bug...
This summer I have a big round two of mods planned, also some maintenance stuff on the suspension; just did pretty much all my gaskets on the powertrain about 10k ago:
-Top-Swap with Ported Gen3 and LIM
-N* TB Kit
-MPS with 3.8" and 3.4" pullies
-Trans Temp Gauge
-Boost Gauge
-Wideband AFR Gauge
-Oil Pressure Gauge
-Speed Daddy Headers
-4" HAI
-DIY Shift Kit
-WBS Lowering Springs
-ZZP 5th SS Brake Line
-F-Body Calipers
-WBS Performance LCA's
-Strut Top Plates
-Front Wheel Bearings
-Tie Rod Ends
-Sway Bar Endlinks
-6000k HID's
-27% Tint
-Black Accents and Wheels
Pics are here:
Pictures by Wrongwayislost77 - Photobucket
I think the N/A stuff is going into my dad's '99 Intrigue for a turbo build!
The mod list is as follows:
-GMPP Handling Kit
-ZZP Front and Rear Strut Tower and Cross Braces.
-KYB AGX's
-GXP 18's (For Sale right now, PM me for details.)
-12" Slotted Brakes with Braided SS Lines
-WizAired CAI
-ZZP HVTB Stage 1
-HV3
-ZZP Ceramic Coated PowerLog
-ZZP 1.0
-Alternator and Voltage Boosters
-Spyder Projectors
Well, I recently went through a breakup and all the extra dough I'm not spending on her was piling up so I decided to feed the Mod-Bug...
This summer I have a big round two of mods planned, also some maintenance stuff on the suspension; just did pretty much all my gaskets on the powertrain about 10k ago:
-Top-Swap with Ported Gen3 and LIM
-N* TB Kit
-MPS with 3.8" and 3.4" pullies
-Trans Temp Gauge
-Boost Gauge
-Wideband AFR Gauge
-Oil Pressure Gauge
-Speed Daddy Headers
-4" HAI
-DIY Shift Kit
-WBS Lowering Springs
-ZZP 5th SS Brake Line
-F-Body Calipers
-WBS Performance LCA's
-Strut Top Plates
-Front Wheel Bearings
-Tie Rod Ends
-Sway Bar Endlinks
-6000k HID's
-27% Tint
-Black Accents and Wheels
Pics are here:
Pictures by Wrongwayislost77 - Photobucket
I think the N/A stuff is going into my dad's '99 Intrigue for a turbo build!