• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

blower removal

G

gotboost3

New member
if i want to remove my supercharger to rough polish it or paint it and remove the fuel rails whats steps do i take? also i would like to remove the valve covers but those just are bolts i think lemme know.... thanks
 


Unclip all the injectors and remove the 4 nuts that hold the fuel rail on and BE CAREFUL...I snapped 2 of them :(
 
you snapped 2 injectors? is it easier to remove the whole fuel rail with the injectors still attached i saw that in a how to they said to slowly pull up on one corner and the injectors will come out with the fuel rail....what do i need to do to relieve fuel pressure?
 
Remove your gas cap and there is a valve on the front of the fuel rail that you press down. Like a tires valve stem. You can't Miss it. I removed my fuel rail with all injectors still connected to it just fine.
 


iamwhutiam003 said:
you snapped 2 injectors? is it easier to remove the whole fuel rail with the injectors still attached i saw that in a how to they said to slowly pull up on one corner and the injectors will come out with the fuel rail....what do i need to do to relieve fuel pressure?
Click to expand...

No, I snapped the studs off in the LIM...that BOLT the fuel rail on...I guess my 125lb. massive body weight I put into it was too much for em:th_king-normal:
 
You must log in or register to reply here.
Back
Top