• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Back from the dyno, out of timing and boost.

coolone said:
130's seem to be a bit much for that lift, no?
XP 212/224 .325/.335 116
x1.65 = .536/.552 Lift

Is there a lift height which prescribes certain spring rates? Not being a jerk, just a question I've looked for and not found definitive answers for, lol
Click to expand...

It's almost impossible to have too much spring. There are a lot of factors that need to be considered when picking a spring. Overall cam design, rpm, and boost level will all have an impact on 3800's when it comes to float.
 


Javi said:
LS7 MAF 15865791, Spectre 4" housing 9705, get a coupler and a MAF flow screen.
yes, it can be repinned. as far as the table, I have one for a 3800 if you need it.
Click to expand...

Do you still happen to have a copy of this MAF table?
 
You must log in or register to reply here.
Back
Top