• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

abs and tcs light... still

LAIDBACKLUKE

LAIDBACKLUKE

New member
Ok, so after several months and lots of time and money, I still have the ABS/TCS light. The dealer says its the EBCM, I have put 3 of them in, one of them will work if its cold outside and only for the first time I start the car that day. I have checked the wireing, replaced both front wheel bearings. Are there any other things that might cause this. the rear wheel sensors checked out ok. Also, if I am driving and put it in neutral, the speedo goes to zero, I would think that would have something to do with the front end. But i'm out of ideas. PLEASE HELP. Thanks. Luke
 


LAIDBACKLUKE said:
Ok, so after several months and lots of time and money, I still have the ABS/TCS light. The dealer says its the EBCM, I have put 3 of them in, one of them will work if its cold outside and only for the first time I start the car that day. I have checked the wireing, replaced both front wheel bearings. Are there any other things that might cause this. the rear wheel sensors checked out ok. Also, if I am driving and put it in neutral, the speedo goes to zero, I would think that would have something to do with the front end. But i'm out of ideas. PLEASE HELP. Thanks. Luke
Click to expand...

Dealer is your first problem.
 
I just bought my car and my ABS light is on all the time and my traction control light comes on sometimes when I'm just driving down the road next time I start the car it never comes on, just an intermediate problem.

Just joined this forum to find out some answers on the car. I have a lot of reading to do on this forum!
 
I had mine up on the lift and we found out that the actual connector that connects to the bearing was bad. The connector wire just came out when we barely pulled on it, plus it was really corroded inside the connector as well.
 


You must log in or register to reply here.
Back
Top