98 Grand Prix 3.8 S/C No Spark

[grandamle91]

I just finally got my engine rebuilt and put in and everything fixed after the fire. I have fuel and air. No spark. Torque app shows its cranking around 130-170 rpms and sucking in 140cfm. Plugs are wet. Tried a different known working ignition module and same thing. Any ideas

 

[Scottydoggs]

you got the icm ground wire bolted on at the coil bracket? the cam and crank sensor harness is ok?

check all the fuses?

 

[grandamle91]

Yea, getting 12v to the can and crank sensor, I'm pretty sure I got the ground, I'll check again

 

[grandamle91]

I think I narrowed it to the crank sensor. The 18k pulse is working but the other reads a flat 6v all the time