Wakeboy1337
Member
Alrighty guys, as time closes for me to install my built 98 tranny from my parted out 01 GTP into my new 04 GT,(NA for now, and non tap shift model) I need to know what else I need to do.
Here is what I've done so far,
added the wires to the 04 so I could run the extrenal PnP switch via billboost's tutoural. (turned the inition on and hooked up the switch, works like a champ)
Installed the threaded lines onto the 04.
I've heard something about needing to swap 2 pins on the main connector but I cant find anything with a search and I was hoping someone could shed some light onto which ones.
Here is what I've done so far,
added the wires to the 04 so I could run the extrenal PnP switch via billboost's tutoural. (turned the inition on and hooked up the switch, works like a champ)
Installed the threaded lines onto the 04.
I've heard something about needing to swap 2 pins on the main connector but I cant find anything with a search and I was hoping someone could shed some light onto which ones.
