2008 HUD Installation Help. :)

[RealMcCoy]

I just wanted to see if anyone here has installed a HUD in their 2008. I have acquired the switch with harness, but the HUD didn't come with any harness. I wanted to see, before I tear everything apart, if there is a connector in the harness that goes to the HUD already in the dash or if I'm going to have to fabricate something. If someone could tell me where the connector is along the harness, that would be of help so I can investigate into it before I cut the dash. Thanks.

 

[JBONE]

Did you ever figure this out? I put a HUD in my 06 GT and there was a wiring connector for the projector tucked up behind the gauge cluster, if you pull the cluster you should find it taped in the area where the projector mounts, if that makes sense. The switch wiring is plug and play too....good luck!

 

[Mad Monkey]

reviving a "dead" thread!

Jbone, you installed one? Hows it look? does it look distorted because of different windshield?
Also if you got any pics of how you cut stuff, measurements etc, let me know!

 

[jteske88]

i thought the 04+ had to wired in if they werent factory? why you all lie lol

 

[Mad Monkey]

my 05 has the plug behind the dash... i think.. wont know for a few days lol

 

[KeithGTP03]

They said the same about the 03's. I looked behind my gauge cluster and right cubbie and both harnesses were already there. Then it was just a matter of cutting up my dash.

 

[Mad Monkey]

this is what ive found behind my dash

ive gotta test my centre console see if the plug can be changed for the other one i have with the HUD switch