2008 Grand Prix torque for tie rod to knuckle nut

[daviddawg]

Any one know the torque for the tie rod to knuckle nut.The factory nut has nylon on the threads of nut new one is a castle nut with cotter pin. Thanks for any help.

 

[Fivefingerdeathpunch]

The torque might/will not be the same now, because what if the holes do not line up for the cotter pin.

Just go real snug and make the holes line up.

 

[daviddawg]

Thank you

 

[daviddawg]

Got the specs from moog 22 ft lb. plus 120 degrees

 

[Mirraco]

I do what five finger said. Get it as tight as possible, with the holes lined up. I tighten it down, then check holes, if it needs to go tighter, than it gets tighter.