MikeJenkins
New member
2007 Grand Prix GXP.
Getting c0186/c0196 (C0186, C0196) codes Lateral Accelerometer/Yaw Rate circuit codes on 2007 Grand Prix GXP. If you clear them they pop right back up using a teck II scan tool. Someone told me the problem could be the wires between the EBCM, the actual sensor, or the sensor may need calibration. Any ideas where to begin to fix this issue?
I already had the break fluid pressure sensor replaced, and the EBCM repaired $100 at www.modulerepairpro.com to fix other code issues.
Mike
Getting c0186/c0196 (C0186, C0196) codes Lateral Accelerometer/Yaw Rate circuit codes on 2007 Grand Prix GXP. If you clear them they pop right back up using a teck II scan tool. Someone told me the problem could be the wires between the EBCM, the actual sensor, or the sensor may need calibration. Any ideas where to begin to fix this issue?
I already had the break fluid pressure sensor replaced, and the EBCM repaired $100 at www.modulerepairpro.com to fix other code issues.
Mike
Last edited:
