• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

2002 impala wheel hub replacement

biglion

New member
need advice help how to replace front and rear hubs also what brands are good and i want to replace rotors and brakes also
 


Youtube the repairs if you want a hands on point of view, it's been covered many times over.

Anything that comes up as a grand prix, regal, park ave, impala, monte carlo is the same body platform and the repair is pretty much exactly the same.

Cliff notes, remove wheel, remove caliper, remove rotor, remove axle nut for fronts, remove 3 bolts holding bearing to knock, smack it off with a hammer, replace bearing and install in reverse order.

Axle nut torque spec is 118ft lbs, lug nuts are 100ft lbs. I use the german spec on everything else.

Anything with a good warranty for bearings work. SKF and MOOG bearings are great buys.
 
ok thanks alot for your help i will begin my research also is the front ones going to be a pain im not a mechanic but
i have a sense of know how
 
Youtube the repairs if you want a hands on point of view, it's been covered many times over.

Anything that comes up as a grand prix, regal, park ave, impala, monte carlo is the same body platform and the repair is pretty much exactly the same.

Cliff notes, remove wheel, remove caliper, remove rotor, remove axle nut for fronts, remove 3 bolts holding bearing to knock, smack it off with a hammer, replace bearing and install in reverse order.

Axle nut torque spec is 118ft lbs, lug nuts are 100ft lbs. I use the german spec on everything else.

Anything with a good warranty for bearings work. SKF and MOOG bearings are great buys.



ok thanks for help i wil do my research is the front ones a pain or not im never done this before im sure i could give a try
 


Back
Top