• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

2001 GTP Coupe rubber door top molding

Comanche1959

Comanche1959

New member
The molding that runs along the top of the doors are getting dry and tearing at the back. Anyone know where I can view a parts breakdown and order them? When it rains I'm getting a drip here and there.

Thanks,
Steve
 


If anyone finds a source for these other than a local or online dealership, let me know. The door and trunk weatherstripping is not cheap for these cars.
 
I've hit it pretty hard and can only find them from GM online for about $88 per side. Will keep looking for a day or so, but don't think there's much else out there. My driver side drips in a hard rain so I'm just wanting to get it done....
 
Agree....$$ I hit it pretty hard and can only find them for about $88 per side from the GM online sources. I'll look again and probably just order them so I can get it done. Reveal molding is the description.
 


I have seriously considered neatly trimming the flap all the way off until flush and then installing a foam type stick-on bulk roll kind of weatherstrip there, on top of the existing molding. But have not done it. I believe it would also help wind noise.
 
Yeah, I found that but that one is ten bucks higher than what I found. I get the junk yard option, but that's gonna be an old dried out part too....just like the one on the car.
 
I have the same car with the exact same problem. I've been looking at the junk yard, but they're all the same as mine. I thought about making my own solution but all I can't think of our find anything that works
 
You must log in or register to reply here.
Back
Top