• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

2001 grand prix gp bleed abs?

P

paedbo

New member
I did a search didn't see what I was looking for. brake system was run dry. the abs was removed from car to change brake lines. Will the abs solenoids need to be bled or can I get away with a traditional bleed?
 


if the master went dry you'll have to bleed it. on its own.

the abs, it should pump fluid like a normal brake fluid flush.
 
thanks the master did go dry but I primed it. I started doing it the conventional way and had a hard time until I got the master primed. I'm not done yet but my abs and tcs lights are on so I'm guessing I have a wheel speed sensor issue too
 
to bleed the master. other then taking it off and bench bleeding it.

you can pump the pedal like you would for a caliper, hold the pedal, then crack the line nut on the master, you will hear air spit out, do each line a few times till its just brake fluid forcing out the nut.

i like to put the wrench on the line nut, then wrap a rag around the line nut to keep fluid from spraying all over, or in your eyes.
 
You must log in or register to reply here.
Back
Top