• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

2000 GTP gauge power

T

TZFBird

New member
Long story short, I lost power to all gauges as well as ABS and TRAC CTRL(system in alarm due to SC belt that burned up and hit ABS wire since the PS hose leaked)

I was driving and gauges were working with above issues until I touched the HUD position switch. At that point the TRAC CTRL, ABS, HUD, odometer, and all gauges lost power and either went to 0 such as temp, fuel, RPM, or speedo that went all the way around and is pointing straight down.

I found a temp gauge diagram on google images and it leads me to believe that all the gauges are powered off the same source. I checked all fuses and they are good. So I am only left with a ground which is not what I want to hear but I am prepared to look. I'm not so concerned with anything but the fuel gauge since I have to make a 500 mile drive back home in 2 days.

If anyone could link me to a diagram they might know of I would appriciate it greatly.
 


Without a book I've determined that I've lost power before the 10A I/P-IGN fuse. So that would be coming through the key since none of my lights come on when key is turned. I know my ignition has been on the fritz since the key will not always unlock when engine is turned off, but I didn't know it would do something like this. I'll keep looking but as of right now that is what I'm looking at I suppose. Cell 81 seems to be the circuit that feeds gauges and most indicator lamp +12V.
I can deal with mechanical stuff but automotive electronics can be a nightmare.
 
You must log in or register to reply here.
Back
Top