• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

2000 daytona 500 spoiler fit on 03 gt?



Will I have to drill any new holes?
thank you yet again Bio.... you da man lol!
 
Last edited:
**IIRC** the daytona spoiler is shorter than the stock gt/p so the two holes closer to the window will be showing. not 100% on that but i think its right.
 
well ive heard that I ll need to drill 2 new holes becuase the daytona ones are closer together.
 
not sure on that. my slp gen1 went straight on the stock holes. never seen how any of the other ones mount.
 


The only problems you might run into are going to be the paint fade/scratches from the OEM wing having been on your car for many years, I know mine had that problem when I switched from my OEM to SLP Gen 1 Spoiler. I still need to get it repainted to hide the ugliness of it.

And the drill points are going to be off cause of the position of the Anniv spoiler as compared to the stock OEM spoiler. By how much? I can not say. Sorry.
 
i think your best route to do this would find an SE spoilerless trunk lid and get it all painted together after you drill your own mounting holes.
 
The Gen 2 and the daytona/40th/special edition spoilers sit differently on the trunk. The Gen 2 sits further back and uses the factory bolt locations of a car with a stock spoiler. The daytona style does not sit as far back as the gen 2. You may have to fill in a couple holes and relocate the one's you need. Another option would be to buy the entire trunk with the spoiler or find a gen 2 style spoiler.
 
The Guz said:
The Gen 2 and the daytona/40th/special edition spoilers sit differently on the trunk. The Gen 2 sits further back and uses the factory bolt locations of a car with a stock spoiler. The daytona style does not sit as far back as the gen 2. You may have to fill in a couple holes and relocate the one's you need. Another option would be to buy the entire trunk with the spoiler or find a gen 2 style spoiler.
Click to expand...

I knew someone could help clear this up :th_thumbsup-wink:
 


You must log in or register to reply here.
Back
Top