20.5" steel braided brake hose part numbers

[rottonj]

PM Parkave if you know him, he is on here sometimes and on LS1 Tech in the LS4 section as well. since this is similar to the GXP set up, I would think this is doable with even the shorter braided lines. Give you a chance to test your custom skills. This pic is from his set up, his set up also could have changed by now but he usually has some workable solution.

http://www.hostthenpost.org/uploads/f03b6b8248d60c1368949e4ad847b1b1.jpg

 

[CrazyGuy03]

I'll shoot him a PM

in the mean time I'll still be looking to find the exact vehicle the longer lines are sourced from.
Thats where I am currently. Are the vendors using vehicle "x" or did they have the manufacturer make a custom batch

 

[rottonj]

I am talking about the small adapter hard line he made, just to clarify in case it wasn't clear for others. I am guessing its the Camaro that would be the donor car for the lines. Good luck.