• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

20.5" steel braided brake hose part numbers

CrazyGuy03

CrazyGuy03

New member
I don't want to order a whole set of 4 or 5 I just need 2

anyone know of a site where I can purchase just 2 hoses ?
alternative part numbers ?

thanks
 


Damn. So that is what, the 20.5" lines aka the longer ones needed for the fbody caliper ?
sweet deal Scotty. Thank you
 
id message the seller and ask the line length. im not 100% sure what the line are made for that we use. id think camaro or firebird would be the key.
 
the f body how to on rgs, the pics are pooched, that had a pic of the lines in the box with the part#. but thanks pb. you did good.
 


Yeah. I just need 2 for the front. I have the rest already. One of them "broke" so I figured I'm better off replacing both fronts
 
Point is you're not saving much buying just two. You'll need to bleed the brakes anyways and if something in the front broke, rears can't be in too good shape either.

I'd change all four corners... Just me, my $.02...
 
Well I emailed a sales rep from goodridge to inquire exactly what lines are being sold that fit our application that are the longer 20.5"

Yes I can order a whole set. However I know my rear lines are mint. The circumstances as to why the front lines failed has to do with the car not being in my possession for almost a year. The verdict was they are the shorter lines and was rubbing on my 245/50/16s. However under my observation once the car was back on my property- the line looks cut.

its been a long year and I been on a small hiatus but the stories I could tell you about my dealings with a local collision shop would amaze you.


Plus it would be nice to know if in fact they are just camaro lines, we can save good money ordering from amazon or eBay
 


I remember you dropping it off with a body shop. There was a pic you posted of it sitting in a lot with other cars, behind a chain-link fence. Was gonna ask you how that went. What all did you get done? Gotta post up some pics in your build thread.
 
CHI2000GTP said:
I remember you dropping it off with a body shop. There was a pic you posted of it sitting in a lot with other cars, behind a chain-link fence. Was gonna ask you how that went. What all did you get done? Gotta post up some pics in your build thread.
Click to expand...

its a gonna happen soon. I just have to gather some pictures and sit down to type out some hilarious situations my car has gone through
I dropped it off last December ..... lol
as it sits in my garage I wanted to slap some Chemical Guys on it so I can drive it for a few days before snow comes.
 
i seen pics, snicker snicker lol

truth is it looks just like it always did but real shiny now, and no rust under it any more.
 


The fbody brakes mount on the back side of the where ours mount on the front so them having shorter lines makes sense. What about the gxp or the 06+ impala/monte ss lines?
 
Good question. I can look up those and see what size they are. I don't know why the vendor is being so secretive about the source of the longer lines. I didn't get the impression they were custom made.....
 
I had a site that made to order, was really good stuff. But Goodridge's were best value because for an 1" or so... Is just not worth the custom $.

If I can find the link again I'll share it. All high pressure fittings etc.
 
Thanks man

yeah. I hit a dead end. I can't find the vehicle to cross reference the longer lines to still.
Looks like I'll just have to spend $130 for 2 front lines....
 
You must log in or register to reply here.
Back
Top