1997 2nd design 4T60E Trans pan gasket

[Pauley]

Hi everyone. I'm looking for a part number for my Transmission pan gasket. I own a 97 GPGT 2nd design 3.8 non-supercharged. The two part numbers online that I found are GM Delco 24204624 Automatic transmission pan gasket used with 8mm pan bolts.

OR

24206182 Automatic transmission pan gasket used with 6mm pan bolts.
I can't find a clear answer on which part number applies. Can anybody clear this up? Thanks in advance!

 

[matt5112]

Do you know the size of the bolts?

That is your answer.

 

[Pauley]

No I don't. Was going to slide under there and take one out but with this steady rain, it's not happening yet.

 

[matt5112]

IIRC its most likely the smaller size, but until you check, you can't know for sure.

 

[Pauley]

I'm leaning towards the 6MM as well, thank you Matt..

 

[Pauley]

Wrong part number / 6MM gasket...Re-ordered part number: 24204624 8MM.