• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

1995 GTP engine swap to a SC3800

ArcticWhiteGTP

ArcticWhiteGTP

New member
Ok I own a 95' prix gtp, and the motor has a leaking head gasket. I know the bill is going to be huge. I've been offered a 97 gtp and I'm thinking id be able to get it for 1300-1500 bucks. The 97 is rusted out in many spots so thats why i wanna swap the motor out of it. I have seen it done alot on different sites and I know I need the PCM and wiring harness, possibly the front axles?. But wat else do I need, since there is no " how to " of this swap anywheres on the net that I could find. Would it be worth my time or would I just be driven far into the hole. My gaskets kit for the top end of the 3.4dohc is around 500$. I know the labour will be close to 1000 possibly..or am i wrong?. Any feedback from people who know what they are talking about on here would be awesome. I just don't know enough about this.

thnx
 


Yep, that L67 swap page is a big help. I just about swapped my 1993 GP SE with an L67. I did all the research, made the parts lists and was with weeks of pulling the trigger... then I found my GTP.

Wiring will be the killer. You'll need pinout from your 95 and a 97. You might also consider upgrading to a 98+ PCM and wiring, its much better than the 97s. Just some food for thought.

IIRC, the CV joints have to be built with 3.1/3.4 axles and 3.8 SC axles. Sorry, I really don't have the details on me anymore....
 
You must log in or register to reply here.
Back
Top