• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

07 GP would like a Chevy T-style shift knob, interchange models?

C

cemtex

New member
On my 94 GP it was the same as all of the other GM vehicles for changing the knob (a staple like C clip and done) and I wound us using one from a monte carlo. I never did it for my 97 because of the performance shift button, but now that I have an 07 I no longer have that button and would like the T style shifter. This car though uses a very short phillips screw, and the slots to locate and keep the shifter from rotating are very short and at 3 and 9 o'clock as opposed to 12 and 6.

Long story short does anyone know off hand what other model GMs have shifters that would fit an 04+ GP? I was at the junkyard yesterday and doing a quick skim of chevy even the newer cars were using the old style.
 


Like this?

attachment.php


$10 on eBay. Same at AutoZone.
 

Attachments

  • IMG_20170922_150815_678.jpg
    IMG_20170922_150815_678.jpg
    177.5 KB · Views: 29
Yeah that would be what I was looking for. There was no answers so after two trips to the junkyard I found that the shifter from the Saturn Aura kinda fits. The notches and the fastener are right except the Saturn's shifter sits higher relative to the notches, so I had to hog out the entire inside of the shifter and modify the lever that pushes the button on the car itself. I did this about a month ago and not only it looks way better, but it sits about 1-2 inches shorter than stock.

Now for the next project, changing out the steering wheel (stock for stock).
 
You must log in or register to reply here.
Back
Top