• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

02 Grand prix se car alarm and auto start install help needed.

P

Pmalone

New member
Hi my name is Patrick and I have a 02 grand prix se. Now I bought a car alarm / auto start security system and I have a couple of questions I need answered. First I need to know if the wire in the auto start harness that's for the footbrake (+) wire goes to? I'm a little confused about this. The next question is about the side door positive and negative wires.
The last two questions i have is about the start detect wire. It's said that it's to either the oil pressure (+) or ACC. The last question is about the turn signal wires, there's two that needs to be hooked up. Going to up load a picture of the diagram.
 


Hi i'm back with an update. I wired in the door lock and unlock wires, plus the factory disarming wire. Now one problem I'm having is... getting the turn signal lights to flash when locking and unlocking. I know they have to be diode isolated. But where must they be spliced into is my question. I also need to find the door triggers.
 
I'm just having one issue and it's with getting the engine to start. I have the 12v+ (constant) wired into the solid red wire in the ignition switch. The accessories wire is connected to the Orange ignition switch wire. What I need to know is what is the color of the wire when in the on position and the color of the start wire. Also the starter kill relay is wired like this. 86 is to the alarm, 85 is wired to the pink ignition switch wire, 30 & 87 are to the starter wire. If I'm doing something wrong please let me know.
 


You must log in or register to reply here.
Back
Top