• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Search results

  1. G

    delete please

    oops
  2. G

    TUNED finally

    finally got a tune today and it runs so much stronger...shifts are what i really noticed....feels like a manual with a stiff clutch in it :th_thumb-up:....still have some knock but alot less and its spikes it doenst hold anymore...so much faster and we havent even got into trims and MAF adj...
  3. G

    fudge....

    well a snout i bought had a stripped filler plug....so i had to drill it out and thread it for a bolt and rubber washer....thought i got all the shavings out guess i missed some my sc oil looks like silver sharpie ink....i better change it quick....hopefully all will be ok....
  4. G

    false knock?

    hey guys so my welded pacesetters were touching the tranny case a hair after install not enough to damage anything...but it is enough to make moise at high engine movement....you think a cross over pinging against the tranny case could cause false knock? i get alot of knock and at akward...
  5. G

    new gasket less knock...?

    hey guys just put in my silicone sc gasket and i noticed i have about 2* less knock than before the swap....my old gasket was ripped and missin a piece but i was too broke and lazy at the last time i had the blower off to put a new one in....i guess the huge vac leak was causing a unmetered lean...
  6. G

    silicone gasket need help quick...

    got some silicone sheets to make my own sc gasket....what i wanna know if can i not cut out the passage between the lim and sc for the egr to block it off so i dont have to worry about the ebr blockoff plate on my LIM leaking?? is this safe or can that piece eventually get sucked out?
  7. G

    dodge avenger hah

    ok i was on the way home from a michigan trip a few days ago and i was already going 85mph on the highway....this new gen avenger starts riding my ass and at first i ignore it....then it gets closer and closer...so i punched it all the way to my govenor 127 and i couldnt see it anymore....but we...
  8. G

    radiator hose

    hey guys i noticed the radiator hose under the coil bracket pinches shut when i give the motor throttle....is the hose just old an collapsed?
  9. G

    caliper bracket

    are all the caliper brackets off 04+ impala's a 12 inch bracket ? looking to do a 12 inch upgrade on my fronts and need to know if these brackets will all be 12 inchs if off this year car, it will bolt right in right?
  10. G

    my boring engine bay....

    really needs a polished rotor strip....i like how i found wire loom big enough to cover all that wiring mess that sits in front of the blower :)....what do you guys think if i did a aluminum colored blower with black fins, polished strip, and snout stays the same...and get some fuel rails that...
  11. G

    all this time ...

    well i have been investigating this clunking noise when moving slow and braking and when going over unlevel ground....been driving me nuts for along time!....finally found it today turns out the used zzp poly uppers i bought had some play in their brackets and were clicking around like crazy so...
  12. G

    plug heat range....

    running a 3.4 are AL104's too cold can i get away with 505's? i wanna improve my mileage...
  13. G

    bbv open air

    hey guys i took the lower vac hose off the bbv and plugged the vac fitting on the sensor on the bbv....now thats its blocked couldnt i just take the sensor and hard vac line out and switch the t fitting on the FPR to an L fitting? then when i tune delete the code? no ill effects will be seen...
  14. G

    dexcool swap

    hey guys i wanna drain my coolant and make sure all the dexcool is out is there a good way to make sure and where can i drain most of it from? i wanna switch to the green stuff.....
  15. G

    plug gap

    is 104's gapped at .55 with a 3.4 too big should i do .50? would making it smaller kill some kr?
  16. G

    my one off custom aeroforce :)

    yeahhhh...:)
  17. G

    3.4 is on! belt slip solved still knockin :)

    ok guys so i have the mods listed in the sig soon to be accompanied by a 180 stat.....im completely untuned at the moment and im seeing like 5*-6* of kr! will a tune and colder stat kill most of that? ill prob end up going into trims and maf tune if necessary..
  18. G

    people who painted their snouts

    did you guys sand down the coating on the snout or just clean and paint it?
  19. G

    every one should get one of these

    support gpf, got it from reflective concepts....told them i didnt want the gpf above it to make it more subtle pardon the pic...it turned out like shyt
  20. G

    look at my goody :)

    look what i got for 90 shipped 90 k snout perfect condition no play, zzp mps hub, and 3.4 :) can you say steal n deal!:th_biggrin2: ok 3 options...btw my sc case is black and so is my tb 1. red snout polished rotor strip red tdc intake 2. black snout polished rotor strip, black tdc intake 3...
Back
Top