• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.
HighOctaneRacing

HighOctaneRacing

New member From Enfield, CT
Joined
Last seen
Messages
3,360
Reaction score
0
Points
0

Profile posts Latest activity Postings About

  • S
    I would like to thank you for being so helpful. You have helped with finding or have given me information I have been looking for for a long time. Thanks!
    BillBoost37
    Don't have the time to put them on yet. Especially with potentially swapped a guy some crap from my attic for a 73K mile L67 tonight.
    The Guz
    That should work. I was looking at that one as well. I ended up getting the suvlights one since they are closer to me.
    The Guz
    I just ordered the 9007 relay harness. I don't have apart number. As far as pics of how I ran the harness but I just ran it between the bumper and the frame right behind the grilles to have the harness reach the passenger side. For the drivers side, I ran the power wires through the opening behind the headlight as I have mine connected strait to the battery terminals. You can route it the same way to the fuse box to use that as a power source.
    BillBoost37
    I've never had to use washers. If they are the right poly bushings and you start your bolts at the same time..it shoudl be fine.
    RamairGTP2
    lol no problem man. Glad I was able to help you out some even though I never got to get my dash apart yet.....
    RamairGTP2
    You didn't cut all the way through your data wire did you or may connect to the wrong wire on the speedo? Its weird man I've never heard of this before and if you followed the diagrams that were posted it should have all worked for ya. Tuesday and Wednesday are my next days off work and I should have a chance to pull my dash apart and take pics of the wires. Sorry I haven't gotten back to ya but I've been super busy with work, my house and some other stuff going on in my life.
    The Guz
    That's the only thing that I could think of. Other than that you could double check the connections. Have you posted in the main thread to see if anyone has had the same thing happen.
    The Guz
    The only thing that I can think of is if the connection from the DIC to the OBD II connector is not functioning properly. That is where the data is read from. I would check that connection first.
    The Guz
    Try driving it around for a few days and see if it changes. Also try resetting the mpg readout and also reset the setting for the gallons used. The wiring you used is fine.
    The Guz
    You are going to have to pull out your HVAC controls out to see that brown wire. You will splice into that wire. The same goes for the other wire that goes to the HVAC.
    RamairGTP2
    Did I make a mistake??? If I did my fault. You still need the vss wire attached to the back of the speedo and you are correct about the fuel level. Totally my fault. You should not have any unused purple/ white wires.
    RamairGTP2
    I've got no problem with it. Are things coming along for it? Sorry I haven't gotten around to getting my dash apart yet. possibly next week sometime though because I've got to replace a burnt out light in the dic.
    RamairGTP2
    been really sick man. If I get the chance I will possibly do it tomorrow if I'm not making up hours I missed from work.
  • Loading…
  • Loading…
  • Loading…
Back
Top