• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Recent content by Y2KGTP

  1. Y

    2000 GTP - HVAC Mode selector not working - slightly hear hissing behind the dash

    2000 GTP - HVAC Mode selector not working - slightly hear hissing behind the dash The mode control really does not work much anymore for the vent location selector. dual mode climate control. I am hoping it's just a bad line? If so, something I can grab in preparation of repair/replacement...
  2. Y

    GTP shut off on my way home from work last night

    Had to have it towed. Engine just shut off without anything noisy or obvious. Battery/cranks fine. Full pump kicks on, full pressure at the rail. No popped fuses I can find. Scanned a few times while waiting for tow- no codes. At our local (family owned) shop so curious what it turns out...
  3. Y

    ZZP 3" downpipe install help (rusted parts)

    I bought a 3" downpipe for my car, and the current flange connection between the cat and the back exhaust is a rusted mess. Is there a flange I could purchase to match up by simply cutting off the section? I was not looking to completely replacing cat back at this point.....
  4. Y

    Washer motor does not work -replaced switch and pump

    Washer will not spray. Replaced pump and just replaced the multi function switch but still no-go. Anything obvious I might be missing? My low speed wipers never worked so fixed one thing with the stalk, at least.
  5. Y

    Turn Signal Stalk issues?

    2000 GTP My internment wipers will not work on Low (always goes to high) and my washer pump will not work. Swapped in a new washer pump but still not working. Guessing I may just need to replace the stalk?
  6. Y

    Supercharger rattle + possible bearing whine noise?

    Sounds like a bearing whine from the SC, along with a rattle now and then. I am guessing the coupler is bad, but I worry over the whine noise. Is this something that replacing the SC oil tends to take care of, or possible additional issues (bearing) perhaps?
  7. Y

    Better MPG on highway out of a 2000 GTP

    I accepted a new position for work, and have to start driving my GTP once again (It typically gets 500-1000mi a year of use) I am currently getting about 27mpg and was curious on any suggestions, or mods (ubend delete, etc) that might help a bit while on the highway. This is only for a few...
  8. Y

    Looking for a good cell phone holder

    Looking for suggestions for a cell phone holder that can hold a iphone 7 plus model. Prefer not to use suction to windshield, or magnet mount as does not work well with UAG cases. Vent or CD rom mounts preferably.
  9. Y

    Clicking or vibration noise from supercharger area- (Video)

    The car does not get driven that much, but I noticed this strange noise driving home the other day. Initially I thought it was something that got caught under the front of my car (like a plastic bag flapping at speed), as it was a steady sound that changed with vehicle speed. In the video the...
  10. Y

    Rusted brake line after ABS box cracked - can I bypass ?

    It's leaking from way down here.....
  11. Y

    Rusted brake line after ABS box cracked - can I bypass ?

    So sitting at a drive-thru, my peddle goes to the floor. Turns out I have a leak/crack in one of the lines coming out of the ABS box going down the back wall - really hard area to get to. Can I simply make a plug to screw into the ABS box, so I can get the car slightly safer to my shop?
  12. Y

    My cup holder broke - can I epoxy it back together?

    The cover came off my cupholder. Would it be possible to simply epoxy the cover back to the holder?
  13. Y

    Don't you just hate hit and runs?

    Came out of a store to find this - and no note or security cameras either.
  14. Y

    What voltage should I see at the fuel pump? (2000 GTP)

    I can't seem to find this info anywhere. I just replaced a pump, and was fine for 2 weeks, now back to no start. 1.7v seems far too low. Seems to prime just fine. Bypassed resistor, no change.
  15. Y

    Full guage shows full when it's 1/8th tank - car won't start?

    PROBLEM FIXED = BAD PCM 2000 GTP Went to go start my car today, and it would crank, but not start. Typically it starts in just a bump of the key. I noticed the gas gauge read full, yet the digital display showed 0 mi left. Car was low on gas (1/4-1/8 left) a week or so ago, so not sure why...
See more
Back
Top