• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Recent content by Trett93

  1. Trett93

    flexplate balancing/install

    been a while since ive posted in here, so my car is manual, it uses a flywheel, its being balanced to match the 3.8sc flexplate so i dont throw balance out, but with that being said when you install a flexplate on the stock gtp tranny i notice there is an oblong hole, same with my flexplate, how...
  2. Trett93

    series 2 vs series 3

    alright, so i need a motor for my car, wired for series ii, i know the series iii is drive by wire and a few other things, but will the series 2 harness mate up to the series 3 motor? if so it would be alot smarter for me to buy a 2004 gtp for a winter car then rip the motor in the spring...
  3. Trett93

    2001 sunfire gtp

    Alright, some of you have seen my posts, havent posted much but i thought id upload some pictures of my 2001 sunfire GT with a 2004 impala series II SC swap
  4. Trett93

    broken rod, disintegrated piston

    has anyone ever made a piston disintegrate? ive had a tick/knock for 2 weeks, only maybe drove it 2 times with the ticking, when the car finally quit i wasnt even riding it hard, was just leaving a movie and bang, the car was done, turns out one piston is in the oil pan shattered, another has a...
  5. Trett93

    cylinder #2 missfire

    Hey guys, i have a 2001 sunfire gt with a 5 speed swap and an l67 lol, anyways im having a missfire on cylinder #2, ive tried plugs wires and coil, and still getting my missfire code, the plugs are about 2 weeks old and #2 is already carboned up again, im not really looking forward to a tear...
  6. Trett93

    cylinder #2 missfire

    Hey guys, i have a 2001 sunfire gt with a 3.8 L67 swapped into it, im getting a missfire code on cylinder #2, so firstly i started with a coil, then wires, and splugs, im still getting the missfire and the car bogs bad anywhere under 4,000rpm (5 speed standard swap), i swapped the plugs about 2...
See more
Back
Top