• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Recent content by trenaro

  1. trenaro

    Help with HID Install

    Just got 9007-1 from VVME. Instuctions not all that good. Says I have to drill a hole to get the wires thru? See pics. One pic is the relay. Need to know waht the red and black wire connect to. Second pic is the bulb. Has a grommet on it and is supposed to butt up against the back of the...
  2. trenaro

    Exhaust manifold removal

    I have a cracked exhaust manifold that I want to change. It's the left - front one luckily. I havent seen any posts on anyone doing this. You all know there is not much room there if the nut/stud breaks and it has to be extracted out. Just wanting to know if anyone has sucessfully done this...
  3. trenaro

    Dumb Question?

    Are the heads ( 01 GT) aluminum or cast? Thanks
  4. trenaro

    Those who have HIDS

    Not sure if I want 6K or 8K. Are 6k slightly brighter but more white and 8K more blue but a little less bright. Thanks for opinions
  5. trenaro

    Difference in 9007 and H5 bulb

    I'm buying new replacement headlight housing and it come with an H5 bulb. I know our stock is 9007. Anyone know the difference - is this Ok? Thanks T
  6. trenaro

    HUD

    I havent seen much on this site about HUD problems. Mine's dimming. Another site had a solder fix, which I did, but not so sure it will last. I won't replace it with used. Anyone ever used GM parts direct or any of those places to buy new? Thanks
  7. trenaro

    Rear Hub Removal

    I cant get the rear hub to budge. Will a rental slide hammer get this off? Any other ideas? Thanks
  8. trenaro

    To adjust camber.......

    Do I need camber bolts front and back or just back?
  9. trenaro

    This look OK?

    After changing my axle and tie rod end this is what it looks like now all the time. Does this seem right? More specific - the tie rod end. Sorry it was late when I posted. Thanks http://picasaweb.google.com/trenaro/MyDocuments?authkey=Gv1sRgCNrgvI_1tc-C0gE#5345977809171993138
  10. trenaro

    AC Compressor

    Hey guys Time to fix the AC. Bought the car 3 months ago. About a month ago I tried to rescharge the system (totally out), and it leaked out in about a week. Took it to a shop for testing and was told it was the condensor. Replaced that and tried a recharge again. All of the sudden the...
  11. trenaro

    What exactly are the cradle bolts?

    Thanks
  12. trenaro

    Need help BAD

    Trying to change drivers side halfshaft. finally got it off. Now the problem is the new one isnt going on. Spent 4 hours tonight trying to get it on, its about half way on I'd say and thats from nearly screwing the threads up. I dont want to beat on it anymore and it wont go in. Any suggestions...
  13. trenaro

    Dogbones?

    These mounts they call dogbones - do they have a looseness or play in them naturally? Thanks T
  14. trenaro

    A/C

    Bought this 01 about 6 weeks ago when it was 10 degrees outside. Reached 80 today - decided to try A/C. No workie.....found the clutch on the compressor is not kicking in when the a/c is turned on. Question is ...the clutch is not kicking on. I checked the fuse, relay, wiring. All seem fine...
  15. trenaro

    What's this wire for?

See more
Back
Top