• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Recent content by t24moore

  1. t24moore

    Misfire help after rocker install

    I just replaced some springs and rockers for a friend of mine. When I finished the install I started the car up and it ran okay but made a real loud tapping noise. I let it idle for a bit to see if maybe a lifter had not pumped up however the tapping continued. I removed the front valve cover...
  2. t24moore

    Tengis of MOAR!Performance

    Made me a new collector because my old collector was junk (see sig below). Bored here at work so I felt like sharing some of his work. [:)]
  3. t24moore

    14* of KR..........Trannyman?

    I have been battling this problem for awhile now. Essentially if I just punch the gas I get 14* of KR, if I just give it a TINY bit of gas then punch it I get 0* of KR. We cannot find anything wierd in the scans outside of the 14* of KR. My tranny is stock with a shift kit, is this a possible...
  4. t24moore

    C230 Kompressor

    Driving home yesterday, this car hauls ass up behind me. So I get on it and pu@t like 5 cars on him instantly. I see him flashing his headlights so I slow down. Round 2 He honks 3 times and I let him go first, this is from a 20ish roll. I go WOT and blow his doors off horribly. Again, I see...
  5. t24moore

    Please help me out if you can............

    This is perplexing me! Im finishing up with an engine swap, an L67 into a GT body. Well I go to turn the key foward to pressurize my fuel system to check for leaks and the pump does nothing. Also the starter doesnt do anything as well. What I find wierd is that when the key is all the way...
  6. t24moore

    Car rolls in park

    I just finished my engine swap, however, I havent bolted the flexplate to the torque converter yet. Anywho, when I went to push the car back to its parking space I didnt even have to put the car in neutral, it just rolled! Is this something I should be concerned about before I finish the...
  7. t24moore

    Mr Trannyman, I need your advice

    Okay, I found a donor car to put my valvetrain in. Its a 2002 GP GT. Now my current transmission is a stock GTP unit with a shift kit. I was wondering if it was alright to use the GT transmission seeing as it already has the gearing that I want. My plan is to refresh it and put in some hardened...
  8. t24moore

    What takes longer? Heads/Cam or Engine Swap?

    Unfortunately I wrecked my car the other day, here are some pics :o So im stuck with trying to either pull the motor, in which I have never done. Or pull the heads and cam and put them in a new car when I get one. Ive done this twice. What should I do?
  9. t24moore

    AC compressor Clutch Problem

    Hey all, I have a problem with my air conditioning. When I turn the AC off the clutch on the compressor stays engaged. Only way I can get it to disengage is to take the diode out of the fuse box. My old diode was cracked and I bought a replacement but it still does it. Another thing I noticed...
  10. t24moore

    Easy Performance Flow Charger

    I just purchased the Easy Performance Flow Charger and when I look at the directions they are basic as ever. Im not sure where to splice into the positive fuel pump wire or where to even mount the box. Can anyone help me out? Thanks a bunch.
  11. t24moore

    Car limited to 2 psi!!!!!!!!!!

    For some reason my car is being limited to 2 psi....I dont have a vaccum leak. Or at least my fuel trims dont show one. Any ideas?
  12. t24moore

    P1380-Misfire Detected-Rough Road data not available

    Has anyone ever dealt with this code? (P1380?) I dont know whats causing it for the life of me. Any help is apreciated.
  13. t24moore

    Hello

    Hola mi amigos? Que pasa (thats all I know)
See more
Back
Top