• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Recent content by Stone 316

  1. S

    New rotors pads in front but still pulsates

    I hv an 07 base and i recently changed my tie rod ends and rotors and pads. I changed my brakes because they would shake when i braked but the pads were not to the wear bar they had some life left but swapped em out anyways. The shake isnt nearly as bad but it does still Pulsate and i figured...
  2. S

    Uim leak....... again

    I posted the other day but cant find it.... anyway my 07 na 3800 is leaking right in front of the stat housing under the upper manifold(plenum). I took it off and thought i fixed it. Filled it w coolant and again the valleys on the lim are filled w coolant. Leads me to beleive that ot must be...
  3. S

    Plz help 911

    I have an 07 3800 na and i just changed upper lower intake gasket. Problem is the coolant is coming out infront of tstat housing just above the plenum gasket.... thought that was just air. Any feedback would be appreciated need it back asap Thanx
  4. S

    Cooler lines

    I have an 07 na and it has 200 000kms. The guy before me never changed the fluid so i did it and once it gets hot, it will kick in from a dead stop. I was thinking of adding a tranny line... actually i just ordered it lol. But my question is can i buy a new tranny line for both supply/ return...
  5. S

    Preventative maint.

    I have an 07 na with 212 000kms and of course without fail , another leaking lower intake gasket. Should have been a recall lol. Anyway I've done this once before on my other 3800 and was just wondering if there's anything I can do while I have the lower intake off. I mean anything I can do...
  6. S

    Centre console sub box

    I wanted to do a centre console sub box build for awhile now.. so i did make one behind the gear shifter basically in place of the cubby. I cut it out and with the air space needed for 2 8"s i had no room at all to move, i felt trapped in. The box was 24" high at the highest point. So i removed...
  7. S

    Ps return line install

    I hv an 08 gp and i removed the return line in 3 seperate pieces. I tried putting the new line on and after cursing so the neighbors can hear and counting to 5 before taking a hammer to the closest thing..... i tried removing the tire rod and sway bar end link but not the bushing.... Can anyone...
  8. S

    Gear shifter indicator

    I have an 07 base and im making a custom centre console with 2 8" subs. Harder than i thought..... anyway i want to remove the selector plate but wires are connected to it for lights im guessing. Im hoping i can just remove it but not sure if i can. Pretty sure only way is to break it. Thanks
  9. S

    Ps pump squeal after flush

    I have an 07 buick allure..... my other car was a grand prix hence why im here but i the knowledge here is awesome..... and an allure is just a ifferent shell lol... 3800 series 3. Anyways i followed the instructions on this site, but i didnt start the car when i did it. I removed the return...
  10. S

    Ps pump squeal after flush

    I have an 07 buick allure..... my other car was a grand prix hence why im here but i the knowledge here is awesome..... and an allure is just a ifferent shell lol... 3800 series 3. Anyways i followed the instructions on this site, but i didnt start the car when i did it. I removed the return...
  11. S

    Blending black.....

    I hv an 07 and of course its black.... hardest color to blend so im told. I did my bodywork and only had 1 little hole all the way thru. I bought a rattle can of color match and clear coat seperate... heres were the bs begins. The color doesnt match at all, but when i was doing it i figured i...
  12. S

    Stock deck

    I have a stock deck out of my 08 grand prix base. It was the monsoon with a 6 pack CD player in the deck. I can post a pic when I get home. Is this something anyone is looking for?? Thanks guys
  13. S

    Corn flakes......no thanks

    Hey guys, I tried reading other posts but cant really find one that fits my case. I bought an 07 Buick allure 3.8 190 000 kms. Runs good shifts good..... I wiped the dipstick and decided to do a pan drop cause of the color of oil. I noticed when I was pouring the oil into bottles that there...
  14. S

    Sway bar question

    Hey guys, i changed my sway bar bushings awhile back along w the end links. Im tryinv to hunt down a vibration when i let off the pedal. As soon i give it throttle again the vibration goes away, anyway i noticed my end links were loose so i changed them. The passenger side end link was a pia, i...
  15. S

    Which cat is better

    Hey gang. I have an 08 na 3.8l with 225 000 kms and I need to replace the cat.....again. I bought a walker cat but this time I'm thinking of spending more and buying the bosal cat. Just wondering if anyone used it on here andy how it worked out. I DO NOT WANT TO DO THIS AGAIN lol. But serves me...
See more
Back
Top