• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Recent content by spina74

  1. spina74

    3k and above sputter and fuel pump strainer issue

    My gf's 2001 gtp has had an on going issue where it sputters above 3k sometimes it clears itself and goes and sometimes it sputters, wont accelerate and the CEL flashes. For a while she was running crappy gas that her step dad was putting in her car, which eventually clogged the filter and pump...
  2. spina74

    GTP stalling and smoking.

    My girlfriends car(2001 Gp GTP) has been stalling out constantly and I can't find the issue. When it stalls out it takes some time to start up and when it finally starts it dumps black smoke. So far I've replace the crank sensor which prolonged the time between stalling, but its since came back...
  3. spina74

    Surging/stalling issue

    For a while my gf's car has been stalling at a very slow speeds/stops and surges rpm while its idle(1000-2000rpm), and while shes at highway speeds and cruising, it will jump to 5000 but the car won't go any faster. I have the DTC scan from my HP tuners attached. I'm leaning towards just...
  4. spina74

    Another KR post BUT with HP Tuners scan sheet

    Ok, so I've finally got my hands on HP tuners and was able to scan my gf's car to see the KR. I'm not too sure about KR since I work with mostly N/A cars. Here is the histogram from hp tuners and lmk what you guys think and how I could help reduce the KR. EDIT: Mods are FWI, ported s/c, 3.3...
  5. spina74

    machined lim or not

    I'm getting ready to install a ported m90 and I have a spare lim. The car more than likely will not be intercooled. I am not sure if I should open up the lim or not. If so does anyone have a write up on how to because I can't find one
  6. spina74

    M90 turbines

    I dropped off a spare 97 m90 to be ported at a local machine shop. The machine shop checked over the s/c and said there is some very slight scoring inside the casing but nothing bad, and that some of the teflon is coming off the turbines. They suggested getting new ones. What do you guys think.
  7. spina74

    Projector Headlight bracket

    My girlfriend has a set of projector lights already on her car. She bought it that way. The projector light bracket on both sides is broken. I purchased a set of new stock brackets thinking they are the same..wrong. Does anyone know where to buy new projector light brackets, or am I screwed and...
  8. spina74

    Which roller rockers?

    Which roller rocker company should I get, I'm very familiar with Comp, but I'm not sure what is a common roller rocker that you guys run on the L67's. I'm either going with a 1.9 or a 1.8 and does anyone have the specs on the rockers for when I order them.
  9. spina74

    2001 GTP headlamp mounting panel

    My girlfriends headlight mounting panels are both busted from the previous owner. I went to a body parts dealer and they gave me a 1 piece mounting panel that runs across the entire front bumper. After I bought it I saw that it is 2 separate pieces on her car. I looked everywhere to find the 2...
  10. spina74

    new to 3.8 s/c motors need performance mod help

    My girlfriend just bought an 01 GTP and we want to make it faster but I'm not to familiar with these motors as I am a f-body guy. I have plans of doing a full exhaust system, but I'm not too sure what size pulley to put on, TB, rr's..etc
See more
Back
Top