• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Recent content by silver86

  1. S

    False KR and how to get rid of it.

    Im assuming its false. So for instance, if im on the highway and doing 60-70 and hit the gas, as soon as the car downshifts Im getting a 4-5* spike of KR but it quickely goes away. It doesnt increase with the RPM infact it goes to 0 by the time I **** again. I dont have any exhaust leaks and...
  2. S

    ZZP MPS vs buying hub and pulley separate. Cheaper?

    Am i missing something here? The MPS system is 99.99 or you can buy the hub for 39.99 and the pulley for 49.99...I didnt see anything additional included in the kit but maybe i'm mistaken or missing something here, any incite?
  3. S

    Intercooler and pulley size.

    So right now I have a u-bend delete/104's/FWI/180 stat/3.4" and with 16* I get no KR. If I added an intercooler with just these mods what size pulley should I run? I plan on headers and 1.9's in the future but going to intercool it first. I dont want to order a 3.3 then a 3.2 then a 3.1 so I...
  4. S

    These numbers look ok enough to start adding timing?

    I havent had a chance to rip the wideband off my mustang yet to tune the gp but im hoping to get to it this weekend. How do these numbers look so far and do you think i can start adding a little timing? I dont know what the kr blip is and if i should be concerned about it. First scan was 1st...
  5. S

    How much KR will headers reduce?

    I finally got around to scanning my gtp for KR since i bought it. The current mods are AL 104's/CAI/180* stat/U bend delete/3.4 pulley/old DHP ecm. I run 93 octane and am seeing just a hair above 4*kr at WOT. I want to get rid of it the cheapest way possible. I was hoping that maybe a set of...
  6. S

    lowered car and vibration with accel and shortened dog bones? Bouncing..

    Hi all, I just picked up a 2000 GTP and the previous owner lowered the car. I drove the car to work for the first time today and it was scary! When i would hit bumps i would feel the vibration smooth out when the car was on the up bounce but when it went down it got worse. I figured that the dog...
  7. S

    Can someone look at these readings and let me know if anything is out of whack?

    This is with the car at idle and after a drive. ABSLT TPS 0.0 (It does move when i give it gas) ENG SPEED 775 CALC LOAD 1.2 MAF .44 MAP 29.2 (This number only goes higher when giving it gas) IGN ADV 21.0 ST FTRM1 15.6 LT FTRM1 16.4 FUEL SYS1 CLOSED FUEL SYS2 N/A O2S11 RANGES FROM .065-.815 ST...
  8. S

    P0101 MAF...Replaced and still throwing code HELP!

    So the new (to me) GTP was throwing a MAF code so the previous owner replaced it. Its still throwing the code (which is why he sold it ot me cheap). I hooked up my scanner and at idle it was showing the MAF at .60 lb/m is this within range and what else can i do to diagnose why its still...
  9. S

    Stalling/running rough on cold starts even dies outt a few times but fine when warm.

    First off let me apologize, im new to the gtp world and don't want to start driving everyone crazy with my posts. With that said... I just picked up a 2000 gtp and when i start it in the morning the car initially starts fine and runs good. After a min or 2 the rpm goes up and it is clearly...
  10. S

    Anyone have a fan wiring diagram for a 00 GTP?

    I bought the haynes manual but it looks pretty generic. The previous owner did the manual switch mod and im getting codes p0480 and p0481 so im looking to go back to the original wiring and start from there. The problem is a lot of the wiring is cut so its hard to place what the colors are...
  11. S

    NEW MEMBER HELP PLEASE!! DCT codes and driving issues.

    Hi All, Im new to the forums and just purchased a 2000 GTP with some issues. I ran a code scanner on it and came up with 3 codes. The 3 codes are p0481, p0481 (which i know are the fans and he told me he did something with these so i plan on taking it back to stock. The final code that i have...
See more
Back
Top