• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Recent content by showtastiik

  1. S

    Sonnax 3rd Piston Input Clutch Drum Assembly

    Back Story: I take my whole drum assembly to a transmission place just to get all the bearing replaced with the kit I have. Gets down to the input drum and the guy says he was just air testing it to see if I installed the seals correctly. Said 3rd wouldn't move with his air test. I used blue...
  2. S

    02 GTP trans vs 04+GTP trans?

    Can anyone describe and give a visual what's different between these transmission. In eternally and externally? Sent from my SM-N975U using Tapatalk
  3. S

    04 GTP to 02 GTP transmission conversion

    Need as much info on this subject as possible. I know the pumps, mode switches, manifold pressure switches & pressure control solenoids are different. 1. What else am I missing? 2. Are the Valve Bodies different? 3. Are the Valve Body Gaskets different? 4. Are the Channel Plates different...
  4. S

    2000 Buick Regal GS Top Swap

    I have an 04 GTP donor car so Blower/Fuel Rails/LIM/Cylinder Heads and also an upgraded rebuilt transmission etc. Question # 1. What all do I specifically need to swap out my series 2 for this series 3? Pics would be lovely 2. Transmission's are the same right,4T65E-HD? (My 04 GTP is Not A...
  5. S

    Ignition Coil and Spark Plug Wires

    I hear ppl say stock is better ac delco... And I hear ppl say "Just get zzp coils and 10.5 wires etc... I want to hear from experience players. Which one or is it just a cosmetic preference? PS, what's this deal about NGK Spark Plugs? Please feel me in. Thanks! Sent from my SM-N950U using...
  6. S

    Mods and HP/HPW

    Curious on what HP you can get on a Supercharged 04 GTP without an intercooler, know that every car is different l. Just want to know #'s and/if what did you have before installing an intercooler??? Asking cuz I'm into my build and now that the yr is up, I'm thinking about Turbo and but mainly...
  7. S

    P0716 Code & Hard 1-2 shift

    I recently rebuild my tranny and everything seemed to be 110% solid for 2 weeks. Recently drove it on the highway for a total of 6hrs. Started to notice hard 1-2 shifts. Engine light on. Scanner reads P0716 Wanted to see if anyone out there had any trouble shoot tips or tricks for this code...
  8. S

    Dash Guages shets off randomly

    Was wonder if anybody know specifically what this problem can be.... Goes shets off and I'll have to turn the car off and on to make it work again Sent from my SM-N950U using Tapatalk
  9. S

    Power Steering/Rack & Pinion Cooler

    Any info on a power steering cooler install? Seen some mentioning also having a cooler for power steering/rack & pinion? Curious on all aspects of that if anyone has pics and info of why? Sent from my SM-N950U using Tapatalk
  10. S

    Transmission Rebuild: CAT Fluid/Dex VI or Amsoil?

    I'm hearing and reading a lot of things and wanted to see what you guys think as well. I'm rebuilding my tranny and wonder what will be recommended for my 04 GTP. I know Dex VI is the route but I was curious about The Dex VI mixed with CAT fluid? And what's the ratio? And or Amsoil? Any...
  11. S

    **HELP** 04 GTP SC shifts but wont drive

    Ok, fellas..... Its been a while on this thread BUT I wanted to do all my research and studying as much as possible. Knowledge is power right!... Finally received my AFL Valve from Superior & Bushing Kit from TEP.... Its about to go down soon [emoji32][emoji29]... Since I don't have any access...
  12. S

    Aluminum Oil Pan/bracket for 04 GTP

    I have the steel oil pan with the 'U' like engine bracket... Which bracket do I have to use other than #2?... Also looking to upgrade #4 to Poly Motor Mounts. Do I absolutely have to use the bracket that goes in between differential cover/oil pan (#1)? And do I have to use the bracket that...
  13. S

    SONNAX Billet 3RD Clutch Piston

    Ok, sweet! CNC ported heads, oversized radiator and now tru cool max, along with everything else to support a 3.4 pulley.. Got an aluminium oil pan and zzp aluminum tranny pan. Figure since I got started on the topside, might as well improve the bottom for the future... Dont really have a power...
  14. S

    SONNAX Billet 3RD Clutch Piston

    Any thoughts about this piston? And if you used it, how good did it work for you? Also any tips I'll need to know to have a successful install? I have a rebuild on my hands and I'm looking for parts to put in while I have the tranny out. A few guys here helped me most common issues in the...
  15. S

    Pump Veins/Slide 4T65E-HD

    Been searching every where. Anybody have a link to find these new parts? Sent from my SM-N950U using Tapatalk
See more
Back
Top