• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Recent content by shart

  1. shart

    boost gauge/meter not working

    Hey guys, I recently noticed the stock boost gauge/meter on my 2001 gtp is not showing any boost. I can hear the supercharger whine when I drive so I know I am getting boost, its just not registering at all. It started a couple days ago. Haven't done anything to the car in awhile and there...
  2. shart

    Porting with a dremel..?

    OK before anyone says anything, yes i have searched and i found a couple things but nothing specific. Ive read that it will take forever to port a Gen 3 supercharger. Is this true? Any idea on estimated time? Im just looking to take the V down further and then obviously smooth it out, not go...
  3. shart

    damn rusty exhaust bolts!

    Ok... so I've heard plenty of ways to get them out without snapping them, but I was wondering personal techniques members have used to get exhaust bolts out without snapping them. I tried earlier... sprayed them numerous times with pb blaster for about an hour and the first one attempted...
  4. shart

    supercharger Maintenance

    Yup... planning on more fun stuff! Every now and again at idle I hear a tick sound near the supercharger... not sure if it is supercharger or not, but regardless I'm planning on changing out the coupler with one from zzp. I was planning on doing the snout seal and bearings also, but since I...
  5. shart

    LIM Looks Scary...

    OK... Thinking about attempting to replace the LIM gasket... Watched the video in the how to section... looks like you gotta rip alot of crap apart to get to it... My question for the people that have done it... is it as bad as it looks and also the estimated time from start to finish...
  6. shart

    Supercharger pulley puller.. anyone?

    Hey Guys.... Anyone want to do me a favor and let me borrow a supercharger pulley puller? Im looking to rebuild the snout but from what im seeing im not going to get to far without a supercharger pulley puller... Anyone around the PA area have one i could borrow for a day or so? Or would...
  7. shart

    Custom Tune in PA?

    Anybody know anyone in PA or near PA that tunes or recommends someone for tunning?
  8. shart

    Transmission pan drop.

    So this weekend im planning on replacing the bottom motor mount and since im already down there, im going to drop the tranny pan and replace the filter. Is there a write up on this? Im sure its a pretty simple and self explanatory procedure, but ive never messed with tranny before and rather...
  9. shart

    rubber or hydraulic motor-transmission mount?

    So, what do you guys think? Hydraulic or rubber? Both are about the same price... Planning on doing it this weekend (Yes, i still havent done it yet.) and they are around the same price..
  10. shart

    throttle body spacer... yes or no?

    I've read good and bad things regarding tb spaces... what is everyone's opinion... yes or no and why.
  11. shart

    Could it be... the MAF screen?!?!?!

    Ive been having idle issues after driving for a little while the idle will be high.. when in drive coming to a stop it is at around 1500 and when in park or neutral it jumps to 2000-3000. Ive been beating myself up trying to figure out the issue.. replaced tps, IAC, cleaned MAF sensor. I just...
  12. shart

    High idle in every gear

    Why do i keep having issues after i fix something?!?! OK... In the past couple days this problem has crept up.. The car is fine when i first turn it on.. The idle is right as it should be... but then as i start driving around and it warms up, the rpms are high in every single gear. When i...
  13. shart

    100k mile mark... things to check/replace?

    I recently hit the 100k mile mark and the car is running strong. I've already replaced spark plugs, wires, crank sensor, tps, and both cb axles and tie rod ends. My question... what else should I look at or replace to prevent issues down the road? It's a 2001 gtp. Thanks!
  14. shart

    throttle position sensor trouble

    Ok, I need my tps replaced.... obviously I didn't think it would be to hard to do, but I forgot that gm makes everything difficult. I got the special hex bit I need to use, but there is no space to get in at the bottom one straight.. I can only get at it on an angle and it won't grab. To all...
  15. shart

    Make the vibrations stop!! Help!!

    Hey Guys, My name is Scott and im a new member here. I bought a 2001 GTP about a month ago. The car is amazing for a used 2001 and it is in great shape. Except.... When im going around 50 and up and i get on the throttle i get a little vibration in the front end. The vibration is mild...
See more
Back
Top