• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Recent content by riceburner

  1. riceburner

    cam possibilities?

    I have been looking into rebuilding my heads and dropping in a cam. But I'm not sure what my best option would be. This will be my DD so drivability is a +. What I will have done is: full headers, methinol injection, 3.4, intake, p+p on charger, and p+p on rebuilt heads, along with supporting KR...
  2. riceburner

    injector swap question

    so i was just curious if the stock injectors off an LS1 would work if swapped onto the L67 platform?...
  3. riceburner

    fuse block ?

    so people keep telling me that the 01 gtp has two fuel relays in the fuse block. mine only has one...and when i look at the block there are no metal slots to grab onto the relay....help? car does studder a lot under wot....
  4. riceburner

    methinjection

    i am going to be picking up a system for my car next month and had some ?'s. i tried searching but could not find any answers. first would be, would it be plausible to tap the phelonic spacer for the nosle? second is, what all is involved with tuning the system(map veriable spray). and what...
  5. riceburner

    weird problem???

    so i started the car tonight and was running the defrost a bit and noticed a weird noise comming from the engine. under a closer look, i noticed the a/c compressor was engaging and disengaging and letting out a puff when it disengaged. when i held a higher rpm the clutch stayed engaged. other...
  6. riceburner

    cavi conversion?

    Just kinda curios what it would take to put an L67 into a z24 cavalier. Ie. Comp fab, mount fab ect? I have an itch to try and can't find any info on the subject! Can anyome help me out or point me in the right direction?! Thanks for the help in advance!
  7. riceburner

    '01 alignment ?'s

    well first, i did an alignment diagnostic and the picture is my results, but my ?'s were, can you adjust the caster on these? and second, since the tie rods are on piece w/o a lock nut, how do i adjust the toe?
  8. riceburner

    stroker?

    Swan Racing Products Page pro's and con's? input? opinions?
  9. riceburner

    tuner in denver?

    i need to have my egr tuned out. does anyone live around the denver area?...i dont have much to offer compensation wise thanks to my job cutting me down to 10 hrs a week....but i will try to do something! and i will be willing to drive out to you!...any help would be great!!! :th_praying:
  10. riceburner

    drivability "issue"

    so i got a ? for people real quick on drivability. when i turn the car on "cold start" it has a rough idle, and the low coolant light is on. after a min or so the idle smooths out and after about 4 min the low coolnt light goes out...? anyone haved any ideas? haha sometimes it will idle fine too...
  11. riceburner

    valve lash.

    ok so i rebuilt my engine and now have valve lash. it sounds like its only on a few of them. mostly rear bank. but how do i go about fixing? what could be wrong. i know i forgot to stick a q-tip down in the bolt holes prior to reinstall :th_bangheadonwall:....could they have not torqued...
  12. riceburner

    arp head studs?

    does anyone know where to get head studs? are they worth it?
  13. riceburner

    rotors?

    tried search but could not come up with anything?.... where do i find rotors? i need to purchase more due to mine not having any coating left!!
  14. riceburner

    headlight/fog problem

    THEY NO WORKIE!!!! :th_laugh-pointup: but seriously, i had to jump my car the other night and i was using a 200A jumper box and now my headlights do not work...the turn and side markers work just not the headlights or fogs. i think i may have accidentally fried something when using my jump...
  15. riceburner

    help needed imediatly!

    so i was driving my '01 gtp today and it was running a little rough on start-up but then smoothed out and ran like normal. good power and sputter or anything. then about 20 min into my drive the SES light comes on and all of the sudden a nasty sputter appears and power loss is substantial. about...
See more
Back
Top