• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Recent content by rell2005

  1. rell2005

    Rusty Fuel Filter YYYAAAHHH!

    Plain n Simple. Got a pretty rusty fuel filter. The threaded end doesn't budge. So I sprayed it pretty heavily with some WD40 and gonna let it sit overnight hoping to break threw the rust tomorrow. Any suggestions? Anything else I can do? Alternatives? Hit me.
  2. rell2005

    Rusty Fuel Filter YYYAAAHHH!

    Plain n Simple. Got a pretty rusty fuel filter. The threaded end doesn't budge. So I sprayed it pretty heavily with some WD40 and gonna let it sit overnight hoping to break threw the rust tomorrow. Any suggestions? Anything else I can do? Alternatives? Hit me.
  3. rell2005

    Camming this summer...gotta question...

    So Im going to cam my topswapped and Stage 2 intercooled GT this summer. I am still going tobuse the car as a mild DD, so I was considering the VS cam...but some said they still drve the XP cam daily with no problems. Give me some pros and cons of the two cams. And if i go with the VS cam...
  4. rell2005

    Which Cam to Buy?

    I started putting away money for a Cam in a few months amongst a few other mods like a GenV. So far I have a top-swapped GT with SLP Headers, 3.2 pulley and a S2IC. I'm torn between the VS, which apparently is great with an IC and stock heads, or the XP cam which is more aggressive but...
  5. rell2005

    I was challenged...Should I accept?

    So I guy that does maintenance at our church asked me if I wanted to line up with him after I finished modded my top-swapped GT. He has a completely bone stock 2006 GTO with the LS2 motor, automatic trans. Right now Im top-swapped with a S2IC and a 3.2 pulley with SLP headers. I want to get...
  6. rell2005

    Help me ID if this is a trans slip or not

    I have notice over the past month or so, I'll be driving normally, not even fast. Where I'll feel what Im not sure is a slip or not. I'll be as detailed as possible. Lets say I'm doing 70mph on cruise control. I'll give it just a lil bit of gas to pass another car, no more than 5-10%...
  7. rell2005

    what are your temps?

    What are your all around temps? Its been 90+degrees in Detroit so i have been monitoring all my temps. My coolant and trans stay around 200* in thedaytime. Trans got to 220 today in a traffic jam. Motor is around 190-210. Intake temps are usually between 85-100. Today was 125. No clue...
  8. rell2005

    Top Swap and S2IC Knock KR issues

    Im having around 4-5 degrees KR and figured I would see it anyone had any others ideas I didnt think of...The mods are the Top-Swapped GT motor with SLP headers, 3.2 pulley and the Stage 2 IC. New spark plug wires from ZZP and AL103 plugs. I would like to believe its a fueling issue, maybe an...
  9. rell2005

    Bad starter???

    If its not one thing its another. Leaving work a half hour ago, my GP turned over as if it has a bad battery. I know for a fact the battery is fine, all the lights in the car we fully on and weren't dim. I have been having ignition issues where I go to turn the key and it'll take a sec or two...
  10. rell2005

    Misfiring on Cylinder 5

    After I replaced my Valve cover gaskets today, cylinder 5 began misfiring. There was not misfire last night as it drove fine. I checked and all the plugs and wires were fitted properly and the plug wasn't cracked. I put in new spark plug wires and replaced the plug only to see its still...
  11. rell2005

    Leaky valve cover gaskets...which ones to buy?

    I'm replacing my valve cover gaskets because the one's I picked up from zzp leak...ANY SUGGESTED BRANDS for valve cover gaskets???
  12. rell2005

    New top-swap...6 deg. Knock at WOT

    Aight car guys...The newly top-swapped GT on a 3.4 pulley and headers running 93 read 6 deg. knock at WOT tuners for some reason wouldn't read RPM, Boost, A/F, gear, trans temp, and injector pulse width. Other than at WOT, she runs fine. Were thinking is has something to do with Air/Fuel...
  13. rell2005

    S2IC hood clearance ...Cradle spacer...WTF!?

    I got a new S2IC set up off the forum instead of a cam for a few reasons...But now a buddy of mines claims I need a cradle spacer because the Intercooler gonna rasie the S/C too much...I've read differently. I know he can be extremely over-analytically and quite a bit. ZZP says you do need...
  14. rell2005

    S2IC Question...Cradle Spacer WTF!?

    I got a new S2IC set up off the forum instead of a cam for a few reasons...But now a buddy of mines claims I need a cradle spacer because the Intercooler gonna rasie the S/C too much...I've read differently. I know he can be extremely over-analytically quite a bit. ZZP says you do need one for...
  15. rell2005

    Difference between Intercoolers???

    What is the difference between the SSIC and the stage 2 IC...I was just curious on the differences besides prices.
See more
Back
Top