• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Recent content by NineD9GT

  1. NineD9GT

    On the dyno today... found out why my last engine blew

    So, finally got my new engine together, and trans rebuilt... ready for dyno. Get the car on the rollers and tighten down straps and do a light pull, then a full throttle pull. The dyno was showing 9 psi of boost, and the pcm was showing 8 vacuum. Turns out, when my donor car's pcm was copied to...
  2. NineD9GT

    no temp gauge or fans

    I know they both worked when I first started car after engine install. Now, nothing... I gotta get these working by wed. so I can take to get tuned. Any quick areas to check? Thanks
  3. NineD9GT

    How are you keeping underhood temps down?

    I wrapped my headers and have a fwi, but I still feel like I'm going to be pulling hot air into my engine. Like my air intake tube will get hot. I made it out of 3 1/2" aluminum tubing. Should I wrap that w/ header wrap or will that not do anything? I'm thinking about making a heat extractor in...
  4. NineD9GT

    central pa...

    where did you have your car tuned? I'm not far from Harrisburg. Thanks
  5. NineD9GT

    couple more pics of build

    should have taken more time with this. Got some dirt in it. just mocked up
  6. NineD9GT

    Engine will be done soon...What to do w/ Transmission?

    So I hope to be above 300 whp with this engine I'm putting together. I'm going to have my trans " freshened up" what should I look into upgrading while its apart. Already bought the transgo kit and going to get a 4th gear shaft. I just can't justify dumping $1900 into a trans for this car...
  7. NineD9GT

    Supercharger back from Reptile, mocking up LS1 tb

    This is the custom LS1 throttle body that my friend and I modified. Hope it works well. Thought it would be different. Before and after M90
  8. NineD9GT

    So, putting engine back together after cam install

    What I'm doing is usind an L26 with my L67 heads. I have engine on an engine stand, and had it upside down to remove the oil pan to install the front cover after installing my cam. My question... I Heard that there is an issue with these oil pumps priming after the oil has run out.? I heard of...
  9. NineD9GT

    What did you use to block egr in intake?

    I mocked up my throttle body adapter (LS1) to my supercharger and sat it on my intake. I didn't think of this at the time, but now, it's blocking the egr port on the intake, which is fine b/c I have the header welded closed. On the last engine, I just hooked it up to look operational, now I...
  10. NineD9GT

    L67 to L32 or?

    Ok, so, I spun a bearing in my higher mileage l67, and am not sure which way to go with this. Should I rebuild what I have, or get a salvage yard engine, get a newer L32, get a longblock...... and the list goes on. Just a rough estimate, I'm prob going to have about 2k in rebuilding my current...
  11. NineD9GT

    swapping an ls4 into a 97-03 gp

    Has anyone tried this yet? I don't think it would be that hard. I spun a bearing in my l67 that I swapped into my 99GT, now I'm looking at my options. Got drinking a couple last night, and bs'ing. "Hey, what's stopping you from swapping an ls4 into that hog?" I said "hmmm, I guess not having one...
  12. NineD9GT

    looking for some input

    I want to sell my car, but has a spun bearing. It's a 99 GT that I swapped in a 99 GTP drivetrain. I added 3.4 modular intense pulley, headers, magnaflow stainless exhaust, NGK tr55 plugs, 180 stat, new water pump, modded air box etc... I was wondering if I should swap another engine in (that I...
  13. NineD9GT

    engine took a shizz today...

    Well, I'm pretty bummed about this. I just completed a swap into my Gt. During the swap, I installed, headers, magnaflow exhaust, plugs, stat, cai, 3.4 pulley etc. I had a local guy tune the car last week. I prob. drove it about 200 miles after tune, and beat on it about 1/4 of that time. After...
  14. NineD9GT

    I have a couple of questions about problems I ran into...

    I just finished my swap, and here are the problems I'm having. 1- Low oil light is on when the car is on in P, N, D ,and 1. Goes off in R, OD, and 2 2- Temp gauge is inop. 3- Fans not working (they work off of temp gauge?) 4- I have a white plug by battery w/ 2 wires in it (one gray and...
  15. NineD9GT

    well, got the car running after swap, but....

    I'm getting two codes: P1676 and p0102. I have some other issues also... Non working temp gauge, the gear indicator on the inst. cluster doesn't work (and no backup lights) showing a low oil, and low coolant light on cluster, poor throttle response, and intermittantly working fans. One major...
See more
Back
Top