• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Recent content by MeanGrn99GTP

  1. MeanGrn99GTP

    ZZP Ported Gen3 to Stock LIM???

    So I decided to purchase a ported Gen3 housing from ZZP after noticing my LIM gaskets were leaking coolant. I selected outlet porting only not realizing that they also mill it out for an intercooler. ZZP customer service says that it will work and flow just fine without being turbulent. In my...
  2. MeanGrn99GTP

    Street Machine Nationals this weekend anyone?

    Anyone going to Street Machine Nationals in St. Paul this weekend?
  3. MeanGrn99GTP

    Anyone have a bone stock tune for a 99GTP? HPtuners file?

    Does anyone have a bone stock tune I can use on HP tuners for a 99GTP? Also, I have no experience sharing tunes via internet so a basic idea would be great! Thanks in advance.
  4. MeanGrn99GTP

    Wot .83 g/cyl

    So I just started logging with HP tuners and at WOT I am seeing lots of KR. After playing with the configurations on the scanner, I added g/cyl and at WOT it's only at .82??? Looking at the timing table that column has more advance than the last column .92. Could this be due to the ported TB...
  5. MeanGrn99GTP

    Ditching the plogs for speed daddys.

    So I decided to do headers like I should have done in the first place. Should I be able to run a 3.4 with some tuning? I bought an AEM WB too. Would it be a good idea to weld the bung in before the install? If so where? What HP /ET's do 3.4" set ups usually run?
  6. MeanGrn99GTP

    Stock cat-back good to 300whp??

    So I have read on ZZP's website that the stock cat-back is not restrictive until the 300whp mark. Is there any dyno proof of this? I replaced my cat back due to rust with and SLP powerflow. Comparing them side by side, looking at the bends, diameter, Y-pipe, mufflers etc. I find it hard to...
  7. MeanGrn99GTP

    Time to upgrade the Bose 99 gtp...ideas?

    So I have the factory Bose system in my car. I want to get some better sound out of it. I want to keep the speakers looking original and my steeming wheel controls funtional. Would the deck be a good place to start? Or replacing the speakers? Mostly just looking for fuller and louder bass. I...
  8. MeanGrn99GTP

    Next Mod and KR reduction Ideas

    Yes I have read the stickies. Here is a list of my current mods. - Wizaird CAI - Ported TB W/spacer and sheild - ZZP coils and wires w/ 104 iridiums Gapped at .055" - 160 stat - ZZP tune - Front and rear plog w/ ceramic crossover - 3" offroad downpipe - 2.5" SLP cat-back New fuel filter and...
See more
Back
Top