• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Recent content by kevins

  1. K

    F body caliper bracket?

    I would prefer to drill and tap the caliper bracket vs use bushings. What size drill bit do you use to enlarge the hole and what size tap? Or do you use a threadsert?
  2. K

    F-body brake ?

    Do i have to buy SS lines to fit the F body brakes to my 97 or can I just reuse the stock rubber lines for now?
  3. K

    Knock sensor ?

    I noticed the white plastic part of the rear knock sensor has come loose and moves around with connector. How would i go ablout making sure it still works? Tap on the block and watch data? or is it to important to even risk? Anyone have an extra one laying around?
  4. K

    Tune predictions

    Put my car on the dyno for a pre tune comparison test. Top swap withVS cam3.4 pulley and ported blower. Made 251 HP and 262 tq.wideband. read 11:9. So how much do you think ill gain from a tune? What ratio do you aim for obviously. Its running a little rich
  5. K

    belt part numer

    Anyone have the part number for the AC delco belt to use with a 3.4" pulley?
  6. K

    Snout shaft splines damaged

    Was going to swap my pulley and noticed the bolt was missing and the threads for it are completely crushed in. If I get the pulley off would I have to drill n tap the snout for the tool or is there another way? Anyone had any success with this?
  7. K

    rim size ?

    I cant seem to find if the 12" brake upgrade will still fit under my 16" rims?
  8. K

    Cam vs. Boost?

    Since installing the VS cam i seem to have dropped down to 5lbs of boost. I could have sworn it was at 6 or 7 before. Stock pulley. Does the cam have any effect on boost levels?
  9. K

    fuel pump resistor

    What is the purpose of the fuel pump resistor? Run on resistor at normal driving?
  10. K

    therm 180

    I have tried 3 auto parts stores for a 180* thermostat. Is this an aftermarket only thing? If not anyone have a partnumber?
  11. K

    hp tuner vs wideband

    i see a version of hp tuners for 499 and it says u can upgrade for 699. do you have to use the upgrade to use the wideband sensor?
  12. K

    Closed loop?

    Finally got my top swap running and noticed it will not go into closed loop. Bank 1 sensor 1 is stuck at 456. I know that means its an open circuit prob. Since i bought the car as a pile of bolts in the trunk i dont know what is original or not.Some of the parts are off of an 06 lacrosse poss...
  13. K

    top swap pulley ?

    Who on here is running a top swap with a smaller pulley with no trouble. getting car tuned in a few weeks and would like to try a 3.4 or 3.5. Is it possible without an IC? Vs cam . Headers. Ported blower. 180 therm
  14. K

    rocker bolts

    I noticed the stock rocker bolts are torque to yield Anyone reuse them or is a given to just replace them.I'm using a vs cam
  15. K

    spark plugs

    What plugs should I use. Top swap,headers,vs cam, ported blower
See more
Back
Top