• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Recent content by Joe

  1. Joe

    LTFT Issues?

    I have two log files with the LTFT up to 16.4 and as low as -20. Is an untuned car really this far off or do I have another problem? (Vacuum leak?, exhaust leak?) I've replaced all the vacuum lines and went through a can and a half of carb + choke cleaner looking for leaks and came up with...
  2. Joe

    P1573

    I have a weird issue. I put a new CV shaft in a week ago, then a day or two later I get a SES light. The only code is P1573, and the only thing I can find on this forum also involves the ABS/TCS lights being on, mine are both off and ABS/TCS work fine. I doubt the CV shaft had anything to do...
  3. Joe

    Bad Knock

    I have a 2000 GTP all stock but I have; U-Bend Delete, Gutted Air Box, Stock Tune with fan changes for 180* Stat, Autolite 605 gapped at .055". Scanned it the other day and I am getting a LOT of knock. This is from a scan today(34 degrees Fahrenheit during scan) about a 40min drive. Histogram...
  4. Joe

    Fuel pump problems

    Last fall I changed my fuel filter, drove to the gas station and filled up, then drove to my mom's. Car sat for maybe a half hour and when I went to start it it ran ruff for a few seconds till I shut it off, noticed the pump wasn't priming when I turned the key. I tried bending the pin on the...
  5. Joe

    Torx size for front seats

    I looked all around trying to find out what size the torx bolt was that hold down the front seats on a 97-03 Grand Prix and couldn't find anything. Figured i'd post a topic to let everyone know what it is. It is a T45 but a T47 might work, a T50 was a little too big and the T45 seemed a little...
  6. Joe

    Few Q's about wiring

    First I'm planning on doing the big three with the bat-alt wiring running from the Bat + to the fuse box post then to the alt. My question, is the fuse box post fused? I'll be putting a fuse holder between the bat and the fuse box post but do I need one from the fuse box post to the alt...
  7. Joe

    Few Question about speakers

    I am going to be installing some 5 1/4" component speakers in the doors. (2000 btw) First off where is everyone putting the crossover and how are you securing it? Second what size is the stock tweeters? I've seen 3/4" and 1" both floating around. Third, if I hook up the stock wiring to the...
  8. Joe

    Performance shift on used DIC

    I bought a used DIC for my 2000 GTP from a guy on ebay who said it was out of a 2000 GTP(had TCS). Put it in and all seems to work ok but the Performance Shift does not light up on it. I hook my old DIC back up and the Performance Shift lights up fine. Digital DIC btw Any ideas what is...
  9. Joe

    Lights in Window Switches

    I'm changing all my lights over to blue and I was wondering if the window switches in the back doors have light bulbs in them? Mine don't light up if they do but I don't want to rip them apart if there is no bulb to replace. Also does the switch for the sun roof have a bulb in it? Thanks, Joe
  10. Joe

    Gauge Face Overlay

    I'm in the process of switching my lights over to blue and I am stuck at the dash. I don't really want to buy the reverse glow gauges as I don't want white and the black one don't seem to have the right color of blue(might just be the pictures I've seen) also the black one is $80 or more. So I...
See more
Back
Top