• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Recent content by JimSWylie

  1. JimSWylie

    4T65E Tech/Service Manual

    It took a lot of searching but i finally found it, a Complete 4T65E Tech/Service Manuals for needing a complete rebuild and or service procedures. Very useful and worth getting.
  2. JimSWylie

    NEED ADVICE - 4T65E HD Diff Gears Breaking Apart

    4T65E HD Diff Gears Breaking Apart First of all About 3 months back, along story short, i converted the trans from non HD to HD. About two weeks ago my trans started to delay shift while transitioning to shift up to next gears on a few occasions, to the point of getting past the rev limiter i...
  3. JimSWylie

    4T65E HD Diff Gears Breaking Apart

    4T65E HD Diff Gears Breaking Apart First of all About 3 months back, along story short, i converted the trans from non HD to HD. About two weeks ago my trans started to delay shift while transitioning to shift up to next gears on a few occasions, to the point of getting past the rev limiter i...
  4. JimSWylie

    4T65E HD Diff Gears Breaking Apart

    4T65E HD Diff Gears Breaking Apart First of all About 3 months back, along story short, i converted the trans from non HD to HD. About two weeks ago my trans started to delay shift while transitioning to shift up to next gears on a few occasions, to the point of getting past the rev limiter i...
  5. JimSWylie

    Perf. Shift Light

    Any one out there know how to wire in either perf. lights (In the dic and or in the dash cluster) I've got the switch wired in and perf. shift turns on and off but no indicator light. I've got a 2002 GP SE that had the 3.1 and swapped for a 3.8 s.c. with the 3.8 s.c pcm and bcm.
  6. JimSWylie

    Finally had to change my coolant elbow

    Finally had to change my coolant elbow. Last week it split at the molded seam shooting water everywhere. At the same time i new i already had oil leaking out of the lim gasket, so i bought the new metal lim gasket set and got the alum. coolant elbow and installation was very simple easy. The lim...
  7. JimSWylie

    MIL Control Circuit trouble shooting

    Does anyone have any ideas on how to trouble shoot the MIL Control circuit? Code is P1671 I did a 98 3.8 s.c engine swap from a 98 GP GTP to a 02 GP SE that had a 3.1. I am using the 98 pcm. When i plug in my scanner i can go to output controls and select turn on MIL light, it does not...
  8. JimSWylie

    Performance Shift wiring circuit

    Im looking for wiring a complete wiring circuit diagram for a 98 GTP, From the pcm to shifter button to indicator in dash cluster. Does anyone out there have any info on this? I have the pin grounded write now and is working but i would like to be able to turn it on and off with the shifter...
  9. JimSWylie

    PCM Harness Pin Removal and in stall

    how does one add a wire to pin 21 for performance shift on a 2000 3.8 harness
  10. JimSWylie

    Power L.E.D Mirrors

    Dont know how many people do not want to do the work building their own but i think these may be worth $40ish...
  11. JimSWylie

    New Updates! After swapping 98 gp gtp 3.8 s.c. into a 2002 gp se car

    NEED HELP! A few problems to work out after swapping 98 gp gtp 3.8 s.c. into a 2002 gp se car Not sure if i want to ever do a swap like this again 1 - The only dtc code ive got is p1651-ran control 1 relay or qdm "B" fault fan one does not come on but it did when the 3.1 engine was in the...
  12. JimSWylie

    engine swap question?

    I have a 1998 gtp and am picking up a 2002 grand prix with a blown 3.1 engine and was wandering what all is needed to transfer to the 3.8 sc engine into the 3.1 gp- wire harness under the hood, pcm, dic, insrument cluster, anything else im missing?
  13. JimSWylie

    My 98 GTP with 330,000 miles finally lost the trans during our single digit temps

    My 98 GTP with 330,000 miles finally lost the trans during our single digit temps. So its time to rebuild the trans. I plan on doing it myself, it would probably scare a lot of people but i feel confident about doing it. I've been doing a lot of research on the 4T65E-HD and it does not look to...
  14. JimSWylie

    One Screaming Fast Turboed GTP Found On YouTube

    Thought You Heavily Modded GTP Owners Would Apprieciate This
  15. JimSWylie

    Dash Lights Got Out Warning Chime Comes On But Car Stays Running

    When Starting Car (98 GTP) And Or Opening Driver Or Passenger Door Dash Lights Go Out, heater Shuts Off, Warning Chime Comes On, The Door Unlock Program That I Set Goes Back To Default Setting, and Hud And Dic Goes Out But Car Stays Running, Then Everything Comes Back On in About 2-4 Seconds On...
See more
Back
Top