• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Recent content by jewell83

  1. J

    Abs issues?????

    IF YOU ARE SEARCHING DOWN SENSOR OR WIRING ISSUES I LEARNED THE HARD WAY HOW TO TEST THE WIRING AND WHEEL SENSORS ALL IN ONE TEST. I HAVE BEEN TRACKING DOWN THIS LITTLE ISSUE FOR SOME TIME NOW. I HAVE A SCANNER THAT DOES ABS. IT WAS GIVING ME RIGHT FRONT SPEED SENSOR SUPPLY SUBFAULT, SO I WAS...
  2. J

    Tranny Noise When I Turn The Tires 04 Comp G 4T65E

    Hi I ran into a I think major problem while changing my brakes today. I had my car front end jacked up changing the front pads due to I thought brake noise when driving. Well I had it in the air both front wheels off and I was doing the passenger side I turned the wheel and herd a grinding...
  3. J

    Comp G Axle ??

    I noticed a funny thuddind sound when taking left hand curves, I took off my passenger front wheel and noticed my inner CV joint on my axle had some slack in it like a bearing was out, so I pulled my axle and it had some wear on it the inner cv mainly. I am going to order a new axle and was...
  4. J

    Metal In Filter during pan drop

    Hi I was wondering if it is normal? I was doing a pan drop changing fluid and filter in my 04 comp g with 180000,I noticed it still had the OE filter in it the fluid was kinda dark but not burnt smelling. I noticed the magnet had a quite a bit of metal on it so I decided to cut open the filter...
  5. J

    Upper intake gasket

    Do I need to put any RTV on the gasket where the blower bolts to the LIM or just orings and gasket??? The reason I ask is when I took it apart it was covered with red RTV! The gasket has a small bead of some kind of sealant around it I was just curious before I bolt it down. THANKS
  6. J

    TTY Head Bolt ISSUES

    Hey guys, I am in need of some good advice!!! OK I got my new FEL PRO 9089PT3 gasket kit I also ordered some tty bolts online. I cleaned every thing up very nice tapped all the bolt holes in the block I put on my gasket then put on the head I started tightening up the bolts they screwed in kinda...
  7. J

    L32 cylinder heads

    I just got the heads pulled off my comp g. I took my heads to work cleaned them up in the parts washer . I then noticed 2 small cracks between the valves in one of my heads,this was the head and cylinder that coolant was making its way into #2&4 cylinders. I am going to order a remanufactured...
  8. J

    GTP CompG with L26 Bottom HELP!!!!!

    Hello every one!! I am new here I have a question and need some professional opinions!! I just traded my 96 Z28 for an 04 Grand Prix GTP Comp G. The guy that I traded to put a L26 bottom end only in place of the L32 bottom end due to a burned piston. I know the L26 has flat top pistons and the...
See more
Back
Top