• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Recent content by izup69

  1. izup69

    4T65E on a 2000 chevy venture

    I know this is a grand prix fourm but I also know you guys are some of the best fools out there when it comes to these trans. Got a 2000 chevy venture same trans as in both of my other cars and almost all grand prix's. It will not fully shift into 4th gear driving. It will slip between 3-4th...
  2. izup69

    Tie rod endlink and steering knuckle question

    Ok so maby a dumb question but whatever. When I replaced my endlinks a year ago on my 97 they did not seem to fit the knucle. For various reasons the car has been parked. I started to drive it again and the steering seems super loose on it. I checked it out and the endlink dose not fit snug into...
  3. izup69

    Electrial problems

    Ok so I replaced my start about a month ago with a used one since mine took a dump on me. It ran fine for about 3 days then it seemed like the starter took a dump on me again. I replaced it a 2nd time. Now the batt will not charge and the car dies after the battery drains. I have had the alt...
  4. izup69

    Battery draining

    Well the car started off fine a little while ago the battery took a dump. I replaced it with a new battery and have not ran the car verry much since then. The battery held a charge for a good month before it drained. Now The battery is dead every morning. If I jump the car and run it for about...
  5. izup69

    pulling front o2 sensor

    Ok well I have had a few problems with my car and I'm thinking that they have to do with a clogged cat. I want to test this theory by pulling the front o2 and letting some exhaust out b4 the cat. What is the easy way to do this. I can get a open end wrench on it but I have about a mm of room to...
  6. izup69

    boost only when cold

    Ok so I have had this problem for a while now the car only gives me full boost while It is cold. Once the car warms up it no longer gives me boost. Im just about ready to have the computer relearn factory settings. I have not messed with the pcm the previous owner did. Car dont shift when it...
  7. izup69

    boost issues

    Ok to start out with im only seeing 3.5psi of boost. When the car is cold say 120-160* I get plenty of boost (yes I know its very bad for the car). I have checked all the usual suspects bbv vac leaks ect. I have codes for the maf and the tps. I have replaced both of them twice. If I clear the...
  8. izup69

    help car wont stay running

    Ok so Im on my way to my friends rehearsal dinner for his wedding. Anyway about 3 blocks from where I got to go my car dies. I didnt notice anything strange when it died. Tryed to start it up it seems to start up fine then it starts to chug and die about 2 seconds after you hit the key. If you...
  9. izup69

    Help with factory wiring

    Ok so here is the story my 97 prix is wired to hell from the prev owner. I don't want to have to take the hole head-unit and amp system out.The front door speakers are hooked up to the factory wires. But the amplifier is wired into the the stock mid's wiring. If I unplug the 2 front channels on...
  10. izup69

    Help with HID'S

    Ok ill post some pics when im done just to make sure I know what ones im flipping here is a pic i got the ones that I think I should flip marked its kinda dark out now and its like 12:30 so I dont think ill do it tonight although I might lol. (edit) ok thanks for the help guys I got them...
  11. izup69

    Help with HID'S

    Ok so I got my hid kit from diode. I hooked everything up and only my high beam halogen light comes on the hid wont turn on. When I turn the bright lights on the halogen light dims. But still no hid lighting up. I didn't know if I had to let the ballast heat up. I had them plugged in for about 3...
  12. izup69

    new used pcm car wont start

    Well long story short I got a new to me pcm for my 97 gtp. unbolted/unplugged my old one plugged the new one in and the car wont start up. All lights come on fuel pump primes the car just turns over. Don't even attempt to start up no popping nothing just turns over. If I plug the old pcm back in...
  13. izup69

    need help asap

    I need some help I just installed the drain tray so my floorboard dont get wet now the wippers shut off in the up position. If I take the wippers back off and cycle the key a few times with the wipers on they go to there normal down position. I put the wipers back on when it is in the down...
  14. izup69

    Not fully shifting into OD after warmup

    OK so ne way my car overheated like 3 weeks ago runs like dirt still runs untill I get the cash to turbo/top swap and do some major rebuilding. Anyway the trans runs fine if it is cold once the trans heats up to about 140* it stops shifting into OD fully. The car runs about 2k rps at 55mph...
  15. izup69

    tuners in northwest illinois eastern iowa

    looking for a tuner in the area not really needing a tune but I want someone to look at my 97's pcm and see how much stuff was changed and make a few changes but nothing major just shift points
See more
Back
Top