• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Recent content by indyal

  1. I

    front sway bar removal

    I had to change the front sway bar in my kids car what PITA. It is a 98 gtp you can get it out without dropping the subframe by taking the exhaust pipe loose and resting it on top of the exhaust manifold studs. This will give you the needed clearance to get it installed by rotating the bar down...
  2. I

    blower resistor

    what is the trick to get the blower motor power plug disconnected, only doing the resistor at this time.
  3. I

    3 last problems

    need connection point for small plastic tube that runs up the passenger side shock tower along the fire wall to about half way where does it connect to. Wipers stop pointing srtaight up but in intermitent they stop in the normal down position. what is the fix? drivers window all the way...
  4. I

    power steering pump

    I put a 99 in a 98 the alternator was different I an having trouble getting the pump to go in place. Does the 99 have a remote fill for the fluid it seems to be hitting the alternator bracket. Thanks for the help
  5. I

    2004 enine in a 98

    I can get a 2004 L32 for 450 dollars will it bolt up in the 98 engine bay? I understand the accessories may be a little different so if I use the ones off of the 98 will the swap work?
  6. I

    engine trany won't seperate

    help what am I doing wrong engine won't seperate have 3 bolts out of the converter. 4 from engine to tranny all on top side from ground strap back to by exhaust manifold.
  7. I

    to rebuild or not to rebuild

    Ok so here is my situation, keep in mind this car is for my son so his budget is low. Bought 98 grand prix 3800 SC with 128,000 mile for 400 bucks. They said the engine knocked so I'm thinking rod bearing.The original plan was to take the 3800 SC out of his 92 park ave that the frame rusted...
  8. I

    Fuel line disconnet

    How do you get the fuel lines apart I have the sissor type and round type but i can't get the lines to budge. I am pulling the engine this week end for a new oil pump and oil screen change. Help
  9. I

    oiling problems

    I just bought a 98 grang prix for 400.00 today. it isn't getting oil to the heads any suggestions. My other option is to drop a 92 3.8 in will it bolt up. I know it has different motor mounts I can drill and tap mounting holes if needed.
See more
Back
Top