• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Recent content by ImpalaGTP

  1. I

    low boost after intercooler

    I recently finished an phenolic intercooler install on a 02 gtp and the car seems low on boost. before the intercooler I had a 3.4 pulley an it made around 7psi in this very bad air we have in Tucson (made 10 in the winter and had noticeably more power). upon completion of the intercooler I took...
  2. I

    rollmaster single roller timing set

    I did a search and couldn't find a straight answer so I figured I would make a thread. I put in a vs cam, ls6 springs, and a rm single roller about 3k ago. I did not put a chain tensioner on this set up. However I have noticed other people have been running tensioners on their single setups...
  3. I

    l67 rebuild questions

    here is the pitting
  4. I

    l67 rebuild questions

    so, I decided to freshen up the bottem end of the l67 while I had the motor out, and ran into a problem. cylinder 5 had some pitting, so I started honing it and I think I honed a little too much. I opened the bore up to 3.802 and its still pitted. does anyone know the piston to wall clearance on...
See more
Back
Top