• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Recent content by hollas13

  1. H

    1999 roller rebuild

    Need advice on some first steps to get going. Cleaning replacing certain items. Want to get it totally done and ready for motor and trans.
  2. H

    engine and trans swap

    98 gtp engine and trans into a 95 gtp. What to know? Direct fit?
  3. H

    3800 sc high ltft

    Alright ive got a 98 gtp. 3.4 mps, headers, 1.9 rockers, open cone, 104al, zzp tune :(. recently scanned and saw loss of boost and increase in kr. went from 9.5-10psi to down around 8psi at wot and under 2*kr to around 5. also ltft are stuck at 16.4. wondering what a couple possible causes could...
  4. H

    lean code rough idle

    98 gtp. 1.9s, 3.4 pulley, headers and 103s. Random hard start with a rough idle and p0171 lean code. Any help is greatly appreciated
  5. H

    vacuum leak?

    I have seen on a couple of threads (cant seem to find them now) that your vacuum at idle should be around -20 -21. Is this correct? Im running 1.9rockers, headers, 3.4 pulley, zzp tune, al103's, 180tstat and fwi and only seeing around -10 at idle. 98gtp. Im still getting kr but its not...
  6. H

    going intercooled

    So this coming weekend im picking up a core and a buddy of mine is hooking me up with a heat exchanger. Just wondering what advice anyone would have when doing this. Mounting the heat exchanger running the lines for pump ect. thanks in advance
  7. H

    Post your car scans/time slips here along with mods you have!

    3.4MPS, pacesetter headers, 1.9 rockers, diy intake, AL 103's, 2.5" catback, canned tune and 180* tstat. I need to make it the track
  8. H

    Commanded vs. Actual afr

    How close is the commanded afr readings from actual readings? Commanded afr is just what the computer is trying to get to correct?
  9. H

    e85

    Can you run an e85 mix with out needing to be tuned for it? Regular pump 93 is about 10% ethanol already so if you increase it to say about 20% can this be done Safely.
  10. H

    running your got with no boost?

    So when you pull the sc belt and run your car with out it and check for kr is it telling you that you have false knock?
  11. H

    zzp canned tune

    Alright question is when zzp says they bump the timing up to 18* on there 1.0 standard pcm where do they add the timing at?
  12. H

    Alright another kr question

    98 gtp, 180*tstat, headers, 1.9's, al103's. And zzp tune. I'm hitting about 10.2 psi on a 3.4mps and seeing maybe .3* of kr. Should I pulley down or shrug off that kr? Not gonna be able to get a re-tune for awhile.
  13. H

    maryland

    Any body tuning in the Baltimore dc area?
  14. H

    modded 1.9's and 90lbs springs

    im trying to get away with out pulling the heads on my gtp. now if i go with the modded 1.9's are 90lbs springs neccesary or are the stock ones fine? im assuming i have to upgrade the springs along with it. new hydraulic lifters and 7.00 push rods.
  15. H

    modded 1.9rr

    will modded 1.9's hold just as well or close to the quality of what stock is? and anyone have expirience with the modded ones? im looking to order these tomorrow just trying to get opinions. 3.4 pulley, custom tune, headers, catback, 104's, 180* tstat, open cone, hydaulic lifters, comp push rods...
See more
Back
Top