• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Recent content by Hixc

  1. Hixc

    1997 gtp demod

    Please offer your best offer in PM for any of these parts, Everything came out of the car with 200Miles. Demodding since i lost my job. im also selling the car, if anyone wants the car with these parts shoot me a best offer PM. must hurry while parts are still there S1X Cam- 300 Miles-$250 Used...
  2. Hixc

    Will this Seal Puller Work?

    i have 2 different seal pullers my brother have at the garage. can i use any of these to assist me in removing the driver side axle seal on the tranny? if not, can anyone recommend me one? http://s967.photobucket.com/albums/ae159/Hixchris/?action=view&current=IMG_11671.jpg
  3. Hixc

    Where is my Coolant Temp Sensor Wire!! Posted Vid

    i cant find my temp sensor wire on my harness.. the video explains it all. please check it Car :: IMG_11651.mp4 video by Hixchris - Photobucket
  4. Hixc

    how do i remove this Crankshaft Sprocket(keyway damaged)

    picture below. my car wouldnt start, and this is why. now how do i get this sprocket off, i have the new woodroof key Imageshack - img11631.jpg
  5. Hixc

    Engine wont start

    97 gtp is not starting, i just got done swapping my mods in with S1X and it sounds like it wants to go but doesnt. i have a video of it. Car :: IMG_11411.mp4 video by Hixchris - Photobucket
  6. Hixc

    Vacuum line help. W/ video

    I'm trying to figure out how my vacuum line is supposed to go. I made a video showing where I need help on my gtp. It should be HD. Please help me out Youtube Vid. Now working
  7. Hixc

    Safe to Run 3.0 Again?

    i just did a rebuild on my engine because i blew up my bottom end running the 2.8 pulley on pump gas, not knowing better. here is my mod list. S1X, TOG, Trannyman Gen3, 3.0/2.8MPS, 42.5# Flow Matched, 105# Springs, ZZP Retainers & locks. INTENSE PCM, INTENSE OR Pushrods, INTENSE 3rd gen rocker...
  8. Hixc

    How do I? Valve Spring Compressor

    i rented a valve spring compressor tool from advanced auto parts because i wanted to take the 105# springs out of my old heads and put them in the heads of the used engine i just bought from the junkyard. i did not want to remove the heads because i did not want to have to replace the head...
  9. Hixc

    Took apart the whole engine.. (Advice Wanted)

    so i took apart the whole engine today because there was a loud knock noise coming from the inside of the engine. I had KR up around 14, and i am thinking i overboosted the engine. I had the P0121 code also. I was running a 2.8 Pulley, maybe i should of been going to the 3.0 or 3.1. i always use...
  10. Hixc

    Key Won't Turn!

    98 grand prix gtp. I never had a problem before. i replaced the transmission solenoid and now the key wont turn. the steering wheel is not turned, it is straight and is locked. the steering wheel wont move. the car is in park and can be manually released with the shift lock button next to the...
  11. Hixc

    How To Remove Transmission Help!

    i have a 98 grand prix gtp that needs to have the torque converter replaced. what tools do i need to do this. Also a how to guide with detailed steps would be awsome, since this is my first big project. What size Socket do i need for the Axle Nuts? how does the axle spindles discconect from the...
  12. Hixc

    Shifting Solenoid Problems. Please Help!

    my car 1998 Grand Prix GTP. was running fine then all of a sudden i lost 3rd gear. it shifts from 1-2 just fine but then it revs up to about 3k rpm at 40mph then shifts to 4th gear. manually selecting gear on the gear selector does not put it in 3rd either. i let that go for about 3 months, and...
See more
Back
Top